Changing The Base Pin; Hot Key Selection - Siemens Gigaset 3035 Operating Instructions Manual

26.6.00 sperre.fm
Security
Press the keys in the
specified order
84
Gigaset3035a A31008-G3035-B001-3-7619

Changing the base PIN

The base PIN is used to prevent unauthorised changes to
your base system settings. For example, the base PIN
must be entered before the base lock can be activated, a
new handset can be registered, or hot key or emergency
numbers can be stored.
Call the menu.
Select and confirm.
Enter the base PIN (factory setting 0000) and confirm.
Enter the new base PIN (max. 8 digits) and confirm.
Enter the new base PIN again and save it. The message
"New PIN stored" appears if the base PIN has been suc-
cessfully changed.
and The phone is in standby.
Memorise the new base PIN well! The station will
have to be opened if you forget it. Contact the Sie-
mens Telephone Service in this case, see page 123.

Hot key selection

You can lock your telephone for outgoing calls and still per-
mit the selection of a programmed hot key. This is the only
call number that can be dialled, for example if your child
wants to contact you.
To enable the hot key number to be dialled from the
base station telephone or handset when the base
lock is active, the hot key number must be the same
as the emergency number of the base station tele-
phone.
Correction: 0