Changing The Cmi Logon Pin (Not For U.s.); Changing The Logon Pin; Setting Logon Mode - Siemens HiPath 500 Operating Instructions Manual

Changing the CMI Logon PIN (Not for U.S.)

Step by Step
23 Code, CMI
Program/Service
* 942=Log on CMI unit.?
qmhf
40
Changing the CMI Logon PIN
(Not for U.S.)

Changing the Logon PIN

Before you can log on to a CMI (cordless multicell inte-
gration telephone), you must enter a PIN (default PIN =
19 97 07 07) to place your system in logon mode.
You can change the default code. Please make a note of
the new PIN, because not even the service technician
can recover it later on.
Prerequisite: System administration has been started
page 10.
Select and confirm.
or
fg
Enter PIN
o
Enter the current PIN.
If you have not yet assigned a PIN, use the default PIN
"19970707" the first time you enter it.
o
Enter the new PIN.
o
Enter the new PIN again.

Setting Logon Mode

In order to log on a CMI unit (cordless telephone), you
must set your system to logon mode. You can then log
on your CMI units during the next ten minutes or so.
Press the specified key. The LED lights up
Select and confirm.
or
Enter the code.
o
Enter PIN.