How To Use The Soft Keys; Display Symbols; Protecting Access And Settings: Entering Pin Codes - Siemens Gigaset 3035 Operating Instructions Manual

26.6.00 umschlag_v.fm

How to use the soft keys

Your Gigaset 3035 offers a wide range of menu-controlled functions. These can
be accessed using the two soft keys under the display. The functions and sym-
bols shown above these keys change as the situation demands.

Display symbols

The following symbols may appear on the display:

Protecting access and settings: Entering PIN codes

Special phone functions can be protected by means of three different PIN co-
des. A PIN code is a one to eight-digit secret number of your choice. If you have
not yet entered any secret numbers, press the zero key four times (0000) when
a PIN is requested.
For security purposes, make a note of the PIN codes in these fields.
Base PIN: This is used to lock your base station
telephone and all registered handsets to prevent
unauthorised use.
Account PIN: To keep check of costs, you can set up an
account for individual users (max. 4).
It is then only possible to make a call after the
account PIN is entered.
Answering machine PIN:
1. To protect your answering machine.
2. For remote replay, e.g. from a phone booth.
Glossary
The glossary which begins on page 139 contains information on various terms.
Gigaset3035a A31008-G3035-B001-3-7619 Correction: 0
; < 9
Call up list of providers
Confirm selection in display
Scroll up/down in menus
Scroll left/right
1. This symbol appears
when there are new
messages or entries in
the calls list
2. Press the soft key to
call new messages or
display the calls list
4
U4
Soft keys
Making internal calls
Delete character
Go back one menu level
Call supplementary menu:
You will find important
additional functions here
_ _ _ _ _ 1. End of a menu
2. If you want to go back
to last menu
1.
2.
3.
4.