Speaking To The Subscribers Individually; Ending The Conference Call - Siemens Gigaset 3035 Operating Instructions Manual

26.6.00 mehrere.fm
Telephoning with multiple subscribers
Press the keys in the
specified order
36
Gigaset3035a A31008-G3035-B001-3-7619 Correction: 0
– from an internal call
You are talking to an internal subscriber.
Enter the call number of the external subscriber. You can
also select a number from the telephone directory.
The connection is set up and the subscriber answers.
The conference call is set up.
The display shows the call numbers or names of both
parties.
Handset: Press
select the call number of the external subscriber.
The subscriber answers.
To set up a three-party conference:
Press and

Speaking to the subscribers individually

You have set up a three-party conference and now wish to
speak to the subscribers individually:
This switches to the subscriber with whom you were ori-
ginally connected before the three-party conference was
initiated.
To switch between the subscribers (toggle).
or
Select a subscriber to end the call.
Handset: Disconnect three-party conference:
Press and
Press to end the external call.

Ending the conference call

If you have initiated a three-party conference: Replace the
handset. This ends all connections. The other parties will
hear the busy tone.
If one of the other parties hangs up, you will remain con-
nected to the third party.
during an internal call and
.
to switch to the external call.