Camera Function Menu - JVC GY-LS300CHU Instructions Manual

Camera Function Menu

Menu screen for specifying operation settings
during shooting.
This item can only be selected in the Camera
mode.
Bars
For setting whether to output color bars.
[Setting Values: On, ROff]
Memo :
The audio test signals (1 kHz) can be output
0
simultaneously with the color bar output.
(A P114 [ Test Tone ] )
When the AUTO MODE FULL/PRESET/OFF
0
switch is set to "PRESET" and [Bars] in [Main
Menu] B [Camera Function] B [PRESET
AUTO] is set to Off, this item is fixed at "Off".
(A P101 [ Bars ] )
OIS F
For setting whether to enable image stabilizer.
[Setting Values: ROn, Off]
Memo :
When the lens used supports the image
0
stabilizer feature and there is a "On"/"Off" switch
on the lens, "Lens Set" appears and "On"/"Off"
cannot be specified using the menu.
Shading F
For selecting whether to correct the shading
(decrease in light intensity around the lens) when
a Micro Four Thirds lens (prime lens only) with
shading data is attached.
[Setting Values: On, ROff]
Memo :
When a lens without shading function (lens other
0
than a Micro Four Thirds lens, Micro Four Thirds
lens without shading data, and Micro Four
Thirds zoom lens), this item is fixed at "Off" and
cannot be selected.
Flicker Correction
For setting whether to adjust image flicker that
occurs under a fluorescent light.
[Setting Values: On, ROff]
Shutter
For specifying shutter-related settings.
Set to "Step" (fixed value) or "Variable" when
operating with the J / K volume buttons on the side
of the camera recorder.
Variable:
0
Sets to variable scan. Use this setting when
shooting a PC monitor.
Step:
0
Sets to step shutter, which switches the shutter
speed by a fixed value.
[Setting Values: Variable, RStep]
AE Speed
For setting the convergence speed during AE (Auto
Exposure).
[Setting Values: RFast, Middle, Slow]
AGC Limit
For setting the maximum gain value of "AGC",
which electrically boosts the sensitivity level
according to the brightness automatically.
When [Main Menu] B [LCD/VF] B [Display
0
Settings] B [Gain] is set to "dB":
[Setting Values: 24dB, R18dB, 12dB, 6dB]
When [Main Menu] B [LCD/VF] B [Display
0
Settings] B [Gain] is set to "ISO":
[Setting Values: ISO 6400, RISO 3200, ISO
1600, ISO 800]
Auto Iris Limit (OPEN) F
For setting the limit value of the OPEN end when
auto iris is enabled.
[Setting Values: F5.6, F4, F2.8, RF2, F1.8, F1.6,
F1.4, F1.2]
Auto Iris Limit (CLOSE) F
For setting the limit value of the CLOSE end when
auto iris is enabled.
[Setting Values: F16, RF11, F8, F5.6]
EEI Limit
For setting the shutter speed control range when
the Automatic Shutter mode (EEI) is enabled.
[Setting Values: 4F-stop, R3F-stop, 2F-stop]
Camera Function Menu
97