Table of Contents
Advertisement
1 Select [Main Menu] B [TC/UB] B [TC
Preset] and press the Set button (R).
(A P105 [ TC Preset ] )
The [TC Preset] screen appears.
TC/UB
00:00:00:00
TC Preset
.
Memo :
When [TC/UB] B [TC Generator] is set to
0
"Regen", the parameter is displayed as "Regen"
and cannot be selected.
(A P105 [ TC Generator ] )
2 Set the time code (hour, minute, second,
frame).
Use the cross-shaped button (HI) to place the
cursor at the item to set, then use the cross-
shaped button (JK) to change the values.
TC/UB
00:00:00:00
TC Preset
During drop frame
.
Memo :
Press the [C.REVIEW/4] button to reset each
0
digit to "0". The cursor moves to the time digit
(left).
3 Check the values and press the Set button
(R).
The time code is set and the screen returns
0
to [TC/UB].
To cancel the setting, press the [CANCEL/
0
STOP] button.
4 Press the [MENU/THUMB] button.
Returns to the normal screen.
1
.
Memo :
Setting Time Code
1 Set [TC/UB] B [TC Generator] to "Rec
2 Press the [TC/2] button.
Cursor
During non-drop
frame
.
3 Set the time code (hour, minute, second,
Memo :
Setting Time Code without Opening the
Menu
Settings cannot be made in the following cases.
0
[TC/UB] B [TC Generator] has been set to
0
"Regen".
Menu screen is displayed.
0
The camera recorder is not in the Camera
0
mode.
Run" or "Free Run".
(A P105 [ TC Generator ] )
The [TC Preset] setting screen appears.
TC Preset
During drop frame
frame).
Use the cross-shaped button (HI) to place the
cursor at the item to set, then use the cross-
shaped button (JK) to change the values.
Press the [C.REVIEW/4] button to reset each
0
digit to "0". The cursor moves to the time digit
(left).
Setting Time Code Generator
Cursor
During non-drop frame
71
Advertisement
Table of Contents
