Table of Contents
Advertisement
Memo :
When [Main Menu] B [A/V Set] B [Audio Set] B
0
[Limiter] is set to "Off" while in the automatic
adjustment mode, the limiter operates at -6 dBFS.
When [A/V Set] B [Audio Set] B [Audio On FULL
0
AUTO] is set to "SW Set", you can switch the audio
recording mode with the [AUDIO SELECT CH-1/
CH-2 AUTO/MANU] switch on the camera recorder
even if the [AUTO MODE FULL/PRESET/OFF]
switch is set to "FULL".
(A P114 [ Audio On FULL AUTO ] )
When the [AUTO MODE FULL/PRESET/OFF]
0
switch is set to "PRESET", the Automatic Adjustment
mode is also enabled if [Main Menu] B [A/V Set] B
[Audio Set] B [Audio On PRESET AUTO] has been
set to Auto mode ("Auto").
Setting the Audio recording Level in the
Main Menu
* Enabled only when the handle unit is not attached.
1 Select [Main Menu] B [A/V Set] B [Audio Set] B
[Audio Level].
The [Audio Level] screen appears.
0
Audio Level
Auto
Manual
.
* The contents displayed on the screen vary
depending on the various settings.
2 Select "Auto" or "Manual" using the [LOLUX/3]
button.
If "Auto" is selected, the audio recording level will
0
be automatically adjusted.
If "Manual" is selected, the volume appears on
0
the screen. Use the cross-shaped button (H I)
to adjust the volume.
Memo :
When [Audio On FULL AUTO] is set to "Auto" and
0
the [AUTO MODE FULL/PRESET/OFF] switch is set
to "FULL", the audio recording level cannot be
selected.
If both CH1 and CH2 are set to the built-in
0
microphone or to AUX, settings for CH2 will not be
displayed, and the settings for CH1 will apply to CH2.
68
Audio Recording
Monitoring Audio Sound
During Recording Using a
Headphone
You can check the recorded audio using
headphone.
.
1 Connect the headphone.
2 Select [Main Menu] B [A/V Set] B [Audio
Set] B [Monitor].
3 Adjust the monitor volume using the J / K
volume buttons on the side of the camera
recorder.
Memo :
There is no audio output from the monitor
0
speaker in Camera mode.
Warning tone is output when there is an
0
Set
abnormality in the camera recorder or when the
battery is low.
(A P177 [Warning Tone] )
You can set the volume of the warning tone in
0
[Main Menu] B [A/V Set] B [Audio Set] B [Alarm
Level]. (High/Low/Off)
(A P114 [ Alarm Level ] )
Advertisement
Table of Contents
