JVC GY-LS300CHU Instructions Manual page 132

N ND Filter Position
Displays the current ND filter position.
Memo :
This item is not displayed when [Main Menu] B
0
[LCD/VF] B [Display Settings] B [ND Filter] is
set to "Off".
(A P109 [ ND Filter ] )
Displayed in the Display 0 screen only when
0
there is a change.
O Focus Display
Displays the approximate distance to the
0
subject in focus during manual focus.
There is no icon display in Auto Focus mode.
0
However, the Auto Focus icon e appears
with q only when face detection is enabled.
(A P54 [Adjusting the Focus by Face
Detection F] )
(A P99 [ Face Detect F ] )
Memo :
This item may not be displayed depending on
0
the lens used.
You can specify the display method (Feet/
0
Meter) in [Main Menu] B [LCD/VF] B [Display
Settings] B [Focus].
This item will not be displayed when "Off" is
selected.
(A P108 [ Focus F ] )
Displayed in the Display 0 screen only when
0
there is a change.
P Focus Assist
"FOCUS" is displayed when auto focus is
0
activated.
(A P107 [ Focus Assist ] )
Memo :
Displayed in the Display 0 screen only when
0
there is a change.
132
Display Screen in Camera Mode
Q Date/Time Display
Displays the current date and time.
Memo :
The date/time display style can be specified in
0
[Main Menu] B [LCD/VF] B [Display Settings] B
[Date Style]/[Time Style].
(A P110 [ Date Style ] )
(A P110 [ Time Style ] )
This item is not displayed when [Main Menu] B
0
[LCD/VF] B [Display Settings] B [Date/Time] is
set to "Off".
(A P109 [ Date/Time ] )
When [Main Menu] B [System] B [Record Set]
0
B [Time Stamp] is set to "On", this item is not
displayed.
(A P119 [ Time Stamp ] )
R Zoom Display
Displays the zoom position. (Zoom bar, value
0
or focal length)
.
The zoom bar will only be displayed for 3
0
seconds after the zoom operation is
activated.
The value or focal length will always be
0
displayed.
Value: Z00 to 99
Focal length: ** mm (** denotes number)
Memo :
This item may not be displayed depending on
0
the lens used.
You can specify the display method (Focal
0
Length/Number/Bar) in [LCD/VF] B [Display
Settings] B "Zoom".
This item will not be displayed when "Off" is
selected.
(A P108 [ Zoom F ] )
Displayed in the Display 0 screen only when
0
there is a change.