Adjusting The Lcd Monitor And Viewfinder; Adjusting The Lcd Monitor - JVC GY-LS300CHU Instructions Manual

Adjusting the LCD Monitor

and Viewfinder
You can monitor video images on this camera
recorder using the viewfinder, LCD monitor, or
both.
Normal LCD
Inverted
LCD
.
Displays on the LCD Monitor and
Viewfinder Screen (VF)
[VF
State of
SW]
Viewfinder
Item
Enable Pulled out
Enable Retracted
Disable -
ON: Display on, OFF: Display off
"LCD Monitor Open" includes the state when the
0
LCD display is inverted.
"LCD Monitor Closed" indicates the state when
0
there is no display on the LCD monitor.
Memo :
Press and hold the [DISPLAY] button for 2 seconds
0
to turn ON/OFF the LCD monitor.
The function to switch between LCD monitor and
0
viewfinder displays by pressing the [DISPLAY]
button can be canceled by opening/closing or
rotating the LCD monitor.
When [LCD/VF] B [VF SW] is set to "Enable", it is
0
necessary to pull out the viewfinder in order to
display the images on the viewfinder.
(A P106 [ VF SW ] )
* When [LCD/VF] B [VF SW] is set to "Enable",
images will be displayed on the viewfinder if the
viewfinder is pulled out, regardless of the state of
the LCD monitor.
(A P106 [ VF SW ] )
36

Adjusting the LCD Monitor and Viewfinder

LCD Viewfinder
Screen Screen
LCD LCD LCD
Monitor Monitor Monitor
Open Open Closed
ON ON ON
ON OFF ON
ON ON ON
Adjusting the LCD Monitor
Tilt 90 degrees downward
2
Tilt 180 degrees
upward
.
1 Open the LCD cover.
2 Incline the LCD monitor to a position that
enables easy viewing.
Rotate the LCD monitor to adjust the angle.
While the LCD monitor is open, you can
0
rotate it 180 degrees upward or 90 degrees
downward.
Rotating the LCD monitor 180 degrees
0
upward enables you to see the screen from
the lens side. To display the image when it is
viewed from the opposite direction (mirror
image), perform setting as follows.
Set [Main Menu] B [LCD/VF] B [LCD
Mirror] to "Mirror" B Set button (R)
(A P106 [ LCD Mirror ] )
3 Adjust the brightness, contour, and
contrast of the LCD monitor.
You can change the angle and brightness of the
LCD monitor according to your usage condition.
Changing the brightness of the screen will not
affect the recorded images.
Use the [LCD Bright] menu to adjust the
0
brightness of the LCD monitor.
[Main Menu] B [LCD/VF] B [LCD Bright]
(A P106 [ LCD Bright ] )
Use the [LCD/VF Peaking] menu to adjust the
0
contour of the LCD monitor.
(The contour of the viewfinder screen will
also be adjusted at the same time.)
[Main Menu] B [LCD/VF] B [LCD/VF
Peaking]
(A P106 [ LCD/VF Peaking ] )
Use the [LCD Contrast] menu to adjust the
0
contrast of the LCD monitor.
[Main Menu] B [LCD/VF] B [LCD Contrast]
(A P106 [ LCD Contrast ] )
1