JVC GY-LS300CHU Instructions Manual page 136

I Information Display
The camera information display turns on and off
each time you press the [MARKER/6] button.
Camera information display displays only
0
information of Gain, Iris, Shutter and White
Balance that have been recorded.
P
Camera Information Display
.
Memo :
Trimming information is displayed while
0
trimming is in progress. In this case, pressing the
[MARKER/6] button does not switch the display.
J Date/Time Display
Displays the date/time that is recorded on the
currently played SD card.
Memo :
The date/time display style can be specified in
0
[LCD/VF] B [Display Settings] B [Date Style]/
[Time Style].
(A P110 [ Date Style ] )
(A P110 [ Time Style ] )
K Network Connection Icon
The network connection status is displayed
when [Main Menu] B [System] B [Network] is
set to "On".
This icon is not displayed when "Off" is selected.
(A P115 [ Network ] )
Icon
Connection is not established
(starting up, preparing for
.
(Blink)
connection)
Connection is not established
(preparing for connection)
.
(Yellow)
Connection is established
.
When a USB adapter different
from the connection settings is
detected
.
(No display) When an incompatible USB
adapter is detected, or when
[Network] is set to "Off"
136
Display Screen in Media Mode
0
dB
F1.6
1/ 100
13000K
Status
Memo :
When a cellular adapter that supports LTE
0
connection display is in use, "LTE" will appear to
the left of the above icon when LTE connection
is detected.
L Time Code (I)/User's Bit (J) Display
Displays the time code (hour: minute:
0
second: frame) or user's bit data recorded in
the SD card being played back.
Example of time code display:
0
0 0 : 0 0 : 0 0 : 0 0
.
* Colon (:) denotes non-drop frames and dot (.)
denotes drop frames.
Example of user's bit display:
0
FF E E D D 20
.
Memo :
You can specify whether to display the time
0
code, user's bit, or turn off the display in [TC/UB]
of [Main Menu] B [LCD/VF] B [Display
Settings].
(A P109 [ TC/UB ] )
M Event/Warning Display Area
Displays error messages.
(A P173 [Error Messages and Actions] )
N Media Status
PLAY : Playing
STILL : Still picture playback mode
FWD * : High-speed playback in the
forward direction (* playback
speed: 5x, 15x, 60x, or 360x)
REV * : High-speed playback in the
reverse direction (* reverse
playback speed: 5x, 15x, 60x, or
360x)
STOP : Stop mode
P.OFF : Power OFF
O Check Mark
Displayed when the currently played clip is
selected.
P OK Mark
Displayed when OK mark has been appended.
(A P89 [Appending/Deleting OK Mark] )
Q Clip Information
Displays current clip number/total number of
clips.