Connecting From A Web Browser - JVC GY-LS300CHU Instructions Manual

4 Upload is complete.
After all clips are uploaded successfully,
0
"Successfully Completed." is displayed.
Press the Set button (R) to return to the
thumbnail screen.
When clips are not uploaded successfully,
0
the following errors are displayed.
FTP Upload
Failed.
Internal Error.
Exit
.
(A P174 [List of FTP Transfer Errors] )
Memo :
If there is an error message or other notifications
0
when you switched to the Camera mode while
FTP upload is in progress, a 5 icon (yellow) will
appear in the remaining media space display
area in the Camera mode.
You can press the [MODE] button to switch to
the Media mode and display the above error
screen.
Follow "[List of FTP Transfer Errors] (A P 174)"
to clear the error display.
Connecting from a Web
Browser
You can access the web functions of this camera
recorder via a web browser on devices such as a
smartphone, tablet terminal, or PC.
Make the necessary preparations for connection in
advance.
(A P146 [Connect an appropriate adapter
according to the intended use to the [HOST]
terminal at the side terminal section of the
camera recorder.] )
Cause of
Error
1 Set the camera recorder to the Camera
mode, and display the [Network] (status)
screen.
Press the [STATUS] button on the camera
0
recorder to display the status screen.
Press the cross-shaped button (HI) to
display the [Network] screen.
Check the displayed [IP Address].
0
Type
SSID
Security Type
Passphrase
IP Address
MAC Address
Live Streaming
.
2 Start up the web browser on the terminal
you wish to connect to the camera
recorder, and enter the [IP Address] in the
address field.
(Example: 192.168.0.1)
If "192.168.0.1" is displayed in [IP Address],
enter "http://192.168.0.1".
.
Network
P2P
LS300
WPA2
192.168.0.1
http://192.168.0.1
Uploading a Recorded Video Clip
153