Ftp Resume Feature; Connecting From A Web Browser - JVC GY-HC900CHE Instructions Manual

FTP Resume Feature

When FTP transfer starts and there is a file of the
same name on the server with a file size smaller
than the file to be transferred, the file on the server
will be regarded as an interrupted file during a FTP
transfer. A confirmation screen to resume transfer
(append writing) appears.
.
If "Resume" is selected, FTP transfer is carried out
such that it appends from the position where it was
interrupted.
When FTP transfer ends normally, "Complete"
appears on the screen.
Memo :
FTP server equipped with resume function is
0
required.
If [Network] B [Upload Settings] B [Clip Server]
0
B [Clip-FTP1/2/3/4] B [Protocol] is set to
"SFTP", the resume function is disabled.
If "HTTP" is selected in the [Select FTP Proxy]
0
screen of the network connection setting, the
resume function is disabled.
204
FTP Resume Feature
Connecting from a Web
Browser
You can access the web functions of this camera
recorder via a web browser on devices such as a
smartphone, tablet terminal, or PC.
Make the necessary preparations for connection in
advance.
(A P195 [Camera Setup for Network
Connection] )
1 Set the camera recorder to the Camera
mode, and display the status screen
([LAN] or [USB/Int. WLAN] screen u v
or [USB] screen w x).
Press the [STATUS/SET] button on the
0
camera recorder to display the status screen.
Press the cross-shaped button (HI) to
display the [LAN] or [USB/Int. WLAN] screen
u v, or [USB] screen w x.
Check the displayed [IP Address].
0
2 Start up the web browser on the terminal
you wish to connect to the camera
recorder, and enter the [IP Address] in the
address field.
(Example: 192.168.0.10)
If "192.168.0.10" is displayed in [IP Address],
enter "http://192.168.0.10".
http://192.168.0.10
.
3 Enter the user name and password.
Enter the user name and the password on the
login screen to display the main page of the
camera.
Check the [Web Username] and [Web
0
Password] in the [Network] screen (status
screen).
Memo :
The user name and password can be changed
0
in [Network] B [Web] B [Username] and
[Password].
(A P152 [ Username ] )
(A P152 [ Password ] )