Connecting From A Web Browser - JVC GY-HC900CHU Instructions Manual

o USB wired LAN connection
IP address setting (DHCP or manual)
0
IP Address
0
Subnet mask
0
Default gateway
0
DNS Server
0
Memo :
When an address is manually assigned in a NAT
0
environment, it is also necessary to set the
default gateway correctly besides conversion of
the address at the router's end in order to
perform operations such as access to the
Internet from an external network via the router.
o USB cellular adapter connection
Connection phone number
0
User name
0
Password
0
Caution :
You can access the web functions via a web
0
browser on devices such as a smartphone,
tablet terminal, or PC only in a LAN environment.
Note that you may have to pay very high bills in
0
the case of pay-per-use contracts. Fixed price
contract is recommended if you are using the
network function.
Note that the use of improper settings may result
0
in expensive bills from the phone service
provider. Make sure that the setting is correct.
To avoid expensive bills due to the roaming
0
connection, you are recommended to use this
function by disabling the roaming contract.
There may be communication even when you
0
are not using the network function. Remove the
cellular adapter when the function is not in use.
3 Setting is complete.
After setting is complete, you can access the
camera recorder via a web browser.
30
Connecting to the Network
Connecting from a Web
Browser
You can access the web functions of this camera
recorder via a web browser on devices such as a
smartphone, tablet terminal, or PC.
Make the necessary preparations for connection in
advance.
1 Set the camera recorder to the Camera
mode, and display the status screen
([LAN] or [USB/Int. WLAN] screen u v
or [USB] screen w x).
Press the [STATUS/SET] button on the
0
camera recorder to display the status screen.
Press the cross-shaped button (HI) to
display the [LAN] or [USB/Int. WLAN] screen
u v, or [USB] screen w x.
Check the displayed [IP Address].
0
2 Start up the web browser on the terminal
you wish to connect to the camera
recorder, and enter the [IP Address] in the
address field.
(Example: 192.168.0.10)
If "192.168.0.10" is displayed in [IP Address],
enter "http://192.168.0.10".
http://192.168.0.10
.
3 Enter the user name and password.
Enter the user name and the password on the
login screen to display the main page of the
camera.
Check the [Web Username] and [Web
0
Password] in the [Network] screen (status
screen).
Memo :
The user name and password can be changed
0
in [Network] B [Web] B [Username] and
[Password].