Connecting From A Web Browser - JVC CONNECTED CAM GY-HC500U Instructions Manual

Connecting from a Web
Browser
You can access the web functions of this camera
recorder via a web browser on devices such as a
smartphone, tablet terminal, or PC.
Make the necessary preparations for connection in
advance.
(A P185 [Camera Setup for Network
Connection] )
1 Set the camera recorder to the Camera
mode, and display [Connection Setup]
(status screen).
Press the [STATUS] button on the camera
0
recorder to display the status screen. Press
the cross-shaped button (HI) to display the
[Connection Setup] screen.
Check the displayed [IP Address].
0
2 Start up the web browser on the terminal
you wish to connect to the camera
recorder, and enter the [IP Address] in the
address field.
(Example: 192.168.0.10)
If "192.168.0.10" is displayed in [IP Address],
enter "http://192.168.0.10".
http://192.168.0.10
.
3 Enter the user name and password.
Enter the user name and the password on the
login screen to display the main page of the
camera.
Check the [Web Username] and [Web
0
Password] in the [Network] screen (status
screen).
Memo :
The user name and password can be changed
0
in [Network] B [Web] B [Username] and
[Password].
(A P147 [ Username ] )
(A P147 [ Password ] )
194

Connecting from a Web Browser

o Default network settings (U model only)
If a connection is established from the web browser
without changing the initial setting in [Network] B
[Web] B [Password], a screen prompting you to
reset the password will appear on the web browser.
After configuring the password, you will be able to
access the top page of the camera.
.
If you have initialized all the menu settings or
performed a network settings reset, a screen
prompting you to reset the password will appear
again. Configure the password accordingly in this
case.