Table of Contents
Advertisement
Set the Time Zone
UTC
Coordinated Universal Time (UTC) is the current
standardised universal time format used. Starting from
Greenwich in London (Zero Meridian), the world is split
into time zones. These time zones are indicated with a
EN
deviance from UTC (in hours) for instance UTC+1 for
Central European Time (CET)
Set the Time Zone
In countries with several time zones, you can select
from preset time zones or enter the deviance of your
time zone from UTC. In countries with one time zone,
the setting is adjusted automatically if you set the coun-
try correctly (see also chapter Selecting the Country, page
51).
1. Press C, 012 and OK.
2. Use [ to select the time zone in which you are
operating the device.
3. Enter the Deviance from UTC Manually: En-
ter the deviance (in hours) using the numeric key-
pad, for example, 1 for UTC+1, The display
shows the time zone editor.
Time Zone Editor
Press [ to change the sign (+/-). You can
also enter values under an hour, example,
0.15 (or 0.25) for a quarter of an hour, 0.30
(or 0.50) for half an hour or 0.45 (or 0.75)
for three quarters of an hour.
4. Confirm with OK.
Automatic Changeover Between Summer Time/Winter Time
Automatic Changeover Between
Summer Time/Winter Time
With setting the country and time zone, the au-
tomatic changeover between summer and win-
ter time is switched on. The automatic
changeover is switched off if you enter the devi-
ance from UTC manually using the time zones
editor
%%%Spaltenumbruch$$$
Spaltenumbruch
Set the Time Synchronization
with SNTP Server
Introduction
With the simple time network protocol (SNTP), you
can synchronize the date and time of your device with a
server in the network automatically.
Activating the Server Access
1. Press C, 0103 and OK.
2. Use [ to select whether you would like to turn
the function on or off.
3. Confirm with OK.
Enter the SNTP Server Address
1. Press C, 0101 and OK.
2. Enter the name of the SNTP server.
Enter the Server Address
This name can be in the form of an IP ad-
dress, a DNS address or a NetBIOS name.
3. Confirm with OK.
52
Enter the SNTP Server Port
1. Press C, 0102 and OK.
2. Enter the server port number (default setting: 123).
3. Confirm with OK.
Entering Your Telephone
Number and Name
· Entering Your Telephone Number and Name
Page Header
Your name and number are added together with date,
time and page number at the top edge of each fax trans-
mission (= header).
Folding Up Protective Cover
Fold the protective cover of the letter keypad up
Deckel der Buchstabentastatur öffnen
Cursor Navigation 4
Enter Letters
Enter capital letters by pressing and holding +
key. You can enter space using ½ ;.
The special characters available are located di-
rectly above the letter keypad and can be en-
tered by pressing the õ- key and the respective
letter key at the same time.
You can move the cursor using [. Use C to
delete individual characters.
Entering Name
1. Press C, 021 and OK.
2. Enter the name using the keys (A—Z).
3. Confirm with OK.
Entering Number
1. Press C, 022 and OK.
2. Enter your number.
3. Confirm with OK.
Setting the Ring Tones
· Setting the Ring Tones
Selecting the Ring Tone
Selecting the Ring Tone
You can use this function to select the standard ring
tone. You can assign a seperate ring tones to the entries
in the telephone book (see also chapter Saving Entry,
page 35).
1. Press C, 054 and OK.
2. Select the desired ring tone using [.
3. Confirm with OK.
Philips · LaserMFD 6170dw
Advertisement
Table of Contents
