Table of Contents
Advertisement
Selection Menu for USB Storage
Media
The selection menu for USB storage media
appears on the display as soon as you con-
nect a USB storage medium (USB stick, ex-
EN
ternal hard drive etc.) to the USB host port
on the front of the device.
2. Using [ select PRINT FILE from the menu or
press C, 912 and OK.
Access Function
You can also call the function by pressing C,
212 and OK.
Navigating within the Directory
Press OK to open a folder in the directory.
Use C to return to the next upper level di-
rectory
3. Enter the initial letters or select the file you would
like to print [.
4. Press OK to highlight the file. Files to be printed are
flagged with a star (*).
5. To add more files, select the file using the arrow
keys and press OK. You can only select files from
the same directory.
Select Files Using the Arrow Keys
You can select multiple successive files.
Press + and OK to switch the function on/
off. Highlight the desired files using [.
Once files have been selected, they cannot
be removed from the selection .
6. Press o to complete the selection.
Navigating in the Menu
Press j to close the menu and return to
the starting mode.
7. Enter the number of times you would like to copy
the document (maximum of 99 copies).
8. Confirm with OK.
9. Using [ select the paper source.
10. Confirm with OK.
11. Use [ to select the desired paper format. Follow
the specifications in the technical data.
12. Confirm with OK.
13. Using [ select the weight of the inserted paper.
14. Press o to start the printing process.
Removing USB Storage Media!
CAUTION!
Removing USB Storage Media!
Never pull out the storage medium while the
device is accessing it. This could cause data to
be damaged or lost.
Delete Files on USB Storage
Medium
· Delete Files on USB Storage Medium
USB Storage Media
CAUTION!
Compatible USB Storage Media!
Ensure that the power of a USB device does
not exceed the permitted amp limit of the
USB connection. You can only connect one
high power device (USB 2.0) to each USB con-
nection. Do not connect additional devices—
such as batteries, fans, charging devices—to
your machine. The device only recognises
storage media which are formatted with
FAT16 or FAT32. NTFS is not supported.
Analysing USB Storage Medium
Analysing USB Storage Medium
If a lot of documents are saved on the USB stor-
age medium, it can take a while for the USB
storage medium to be analysed. You can inter-
rupt the process at any time, by pressing j.
Introduction
You can delete files from the connected USB storage
medium.
1. Make sure that a USB storage medium is connected
to the USB host port on the front or on the back-
side of the device. Connect a USB storage medium
as required.
Selection Menu for USB Storage
Media
The selection menu for USB storage media
appears on the display as soon as you con-
nect a USB storage medium (USB stick, ex-
ternal hard drive etc.) to the USB host port
on the front of the device.
2. Using [ select DELETE from the menu or press
C, 915 and OK.
Navigating within the Directory
Press OK to open a folder in the directory.
Use C to return to the next upper level di-
rectory
3. Enter the initial letters or select the file you would
like to delete [.
4. Press OK to highlight the file. Files that are to be
deleted are flagged with a star (*).
5. To add more files, select the file using the arrow
keys and press OK. You can only select files from
the same directory.
Page 28
Philips · LaserMFD 6170dw
Advertisement
Table of Contents
