CI2600
6. Gently slide the bypass rod through the center hole within the fascia and
also guide the primary air control through the slot in the bottom of the
fascia. Push the faceplate towards the unit, ensuring the bolts in Step 2
slide into the brackets installed in Step 1.
7. Ensure the left and right side bolts on the top of the Low Profi le Face-
plate are spaced evenly. The spacing of these bolts is critical to ensure
the faceplate slides into the brackets installed in Step 1.
7/16" bolts on back of
Faceplate
8. Tighten the 7/16'' bolts on the back of the Flat Faceplate
9. Re-install bypass ring and door.
919-322a
2
installation
Final Install
CI2600/HI400 | wood insert
| 19
04/15/14