Table of Contents
Advertisement
Overall intensity levels of the Masters are controlled by the SM Master. The SM Master's level is shown
in the Masters Status Line and appears in a red field if below 100% (FF). A SM Blackout key located
above the SM Master provides for instantaneous blackouts. When the SM Blackout key pressed, the
SM flag in the Masters Status Line is shown in a red field.
A Master's level may also be controlled by another Master that has been configured as a Level
Master. To configure a Level Master, press [MDFY] [FLMT] [11].
Masters Playback Display Area
1.
2.
3.
The Masters Playback Display Area in the Base Screen contains the following information:
1. Masters Status Line: SM Level, Page #, [FLMT] mode (GO, FLASH or SOLO).
2. Master # (yellow if active), Master Level, Cue Name.
3. Cue #, Time information.
Loading a single Cue to a Master
The following example shows how to load Cue 1 to Master 1.
Procedure:
1. Record Cue 1.
2. Press [CUE] [1].
3. Press [LOAD] [M1].
When a single cue is loaded in a Master, the cue name (if entered), number, and fade time
appear beneath the Master's number and level.
Loading a Cue List to a Master
The following example shows how to load Cues 2 thru 10 to Master 2.
Procedure:
1. Record Cues 2 thru 10.
2. Press [CUE] [2] [THRU] [10].
3. Press [LOAD] [M2].
When a cue list is loaded in a Master, the active cue and the next cue appear in a yellow
field beneath the Master's number and level. The cue name of the next cue will be
displayed if entered.
If the first cue number is omitted when using [THRU], the cue list begins with the first recorded
cue. If the last cue number is omitted, the list ends with the last recorded cue. To load all recorded
cues, press [CUE] [THRU] [LOAD] [M#].
Rev. A
Notes:
3: CUE is selected from Options Window.
Notes:
6: CUE List is selected from Options Window.
Page 35
Advertisement
Table of Contents
