Monitors Configuration - Leviton 8700 Series Quick Start Manual

Monitors Configuration

Press [MENU] [60] to open the Monitors Configuration page.
Monitors: Depending on the model and VGA hardware options, up to four monitors may be
connected.
Base Screens: The console must be configured with a minimum of one Base Screen. Depending on
the number of monitors connected, up to three Base screens may be configured.
Base Config: The Base Screen can be configured to display two formats:
Masters + Crossfader Playback information or Cue Parts + TimeCode + Crossfader information.
Aux Config: The number of Auxiliary Screens available is determined by the amount of Monitors
minus the amount of Base Screens (Monitor - Base Screens = Auxiliary Screens).
Aux Config options:
ORDER: Selects channels and fixtures visualization order in the Auxiliary Screen.
NEW PAGE: Selecting Yes forces the channels or fixtures information to be displayed separately on
different pages.
Aux Fix: Permits an Auxiliary Screen to remain fixed without pagination (requires that more than one
monitor be dedicated as an Auxiliary Screen).
Auto Scroll: If Enabled, the Auxiliary Screen will automatically page to the selected channel or
fixture. If Disabled, the Auxiliary Screen must be paged manually using the [ ] [ ] keys.
Follow below to configure the Base and Auxiliary Screens.
Procedure:
1. Press [MENU] [60]
2. Use Arrow Keys or Mouse to select option.
3. Enter or select data.
4. Press [ENTER]
5. Press [EXIT] to close page.
Page 8
Notes:
8700 Series Quick Start Guide