Deleting Fixtures From The Fixtures Patch; Patching Channels - Leviton 8700 Series Quick Start Manual

Deleting Fixtures from the Fixtures Patch

To delete a Fixture from the Patch, select the Fixture with the arrow keys or mouse,
then press [DELETE].

Patching Channels

Before you begin patching, you should set the of number of channels that you will be using. Please see
Console Configuration, page 5
The Channels and Dimmers Patch is opened by pressing [MENU] [01] or [CHANNEL] [CHANNEL]
and is divided into 3 areas: Channels, +Edit, and Dimmers.
The Channels area is where single Dimmers are patched to Channels. If multiple Dimmers are patched
to a Channel, a + symbol appears in the Channel's + cell (see following).
The +Edit area is where multiple Dimmers are patched to a Channel. The Dimmer's limit and response
curve can be set here also.
The Dimmers area, like the Channels area, allows for individual Dimmer to Channel patching. The
Dimmer's limit and response curve can be set here also. The Fxt column indicates a Fixture that is
using an external Dimmer.
A Dimmer's DMX Address and Universe are represented as #.#. The first digit represents the
address, the 2nd digit represents the universe. For example, 1.1 = Dmx 1 of Universe 1.
Page 14
for more information.
DMX Addresses can be viewed by total Console output (e.g. 1 - 2048) or by
individual Universe output (e.g. 1.1 - 512.4). To make your selection, press
[MENU] or use the mouse to access the Options Window.
8700 Series Quick Start Guide