Overwriting a Show
Procedure:
1. Press [MENU] [10].
2. Move cursor to
3. Select 2: Save from the Options Window.
4. Press [ENTER] [ENTER].
5. Press [EXIT] to close.
Loading a Show
Procedure:
1. Press [MENU] [10].
2. Move cursor to
3. Select 0: Load All from the Options Window.
4. Press [ENTER] [ENTER].
5. Press [EXIT] to close.
Console Reset
WARNING! Store the show to disk before doing a Reset. The Reset process erases all console data.
Procedure:
1. Turn the console Off.
2. Press and hold the [] key.
3. Turn the console On.
4. Release the [] key when the LCD
displays RST: Loading System.
If the console cannot be shut off, follow below.
Procedure:
1. Turn the console Off.
2. Press the RST button located on the rear panel. Make sure the power switch is in the Off position
3. Press and hold the [] key.
4. Turn the console On.
5. Release the [] key when the LCD
displays RST: Loading System.
Rev. A
F cell of show to be overwritten.
F cell of show to be loaded.
Notes:
Notes:
Exam Screen showing loaded data appears.
Notes:
Notes:
before pressing the RST button.
Page 41