Table of Contents
Advertisement
One to One Patching
The console default is a One to One Patch. If, after creating a custom patch, you would like to return
to a One to One patch, follow below. In this example, Universe 1 is returned to a One to One patch.
Procedure:
1. Press [MENU] [01].
2. Select
3. Press [0] [ENTER].
4. Press [0] [ENTER] from
5. For Universe 1, Enter .1 and .1 in
the From-To sections.
6. Press [ENTER] [ENTER].
Custom Patching a Single Dimmer to a Channel
Follow the example below to patch Channel 10 to Dimmer 20 of Universe 1.
Procedure:
1. Press [MENU] [01].
2. Press [10] [ENTER] to select Channel 10.
3. Press [ ].
4. Press [20].
5. Press [ENTER].
6. Press [EXIT] to close Channels Patch page.
Custom Patching Multiple Dimmers to a Channel
Follow the example below to patch Channel 5 to Dimmers 5 thru 8 of Universe 1.
Procedure:
1. Press [MENU] [01].
2. Press [5] [ENTER] to select Channel 5.
(continued on next page)
Rev. A
Patch Tools.
Command.
Notes:
Or Press [CHANNEL] [CHANNEL].
Press [MENU] [ ] or use the mouse.
Command opens.
Selects 0: Default.
Use the [ ] key or mouse to navigate.
Notes:
Or Press [CHANNEL] [CHANNEL].
Or use the [ ] Key.
Cursor moves to Dmx address cell.
Channel 10 patched to Dmx 20.1.
Notes:
Or Press [CHANNEL] [CHANNEL].
Or use the [ ] key.
Page 15
Advertisement
Table of Contents
