Table of Contents
Advertisement
Modifying a Cue
Cues can be modified in either the Stage or Blind Editors. Follow the example below to modify Cue 1.
Procedure:
1. Press [RST] to clear Editor.
2. Press [CUE] [1] [MDFY].
3. Perform required modifications.
4. Press [REC].
If a cue is loaded in a Master, it can be modified by pressing [MDFY] [M#].
Examining a Cue
To exam the contents of a cue, press [CUE] [1] [EXAM]. Use the [ ] [ ] keys view additional cues.
Copying a Cue
All levels and properties (name, times, etc.) of the Cue are copied. If a Cue already exists in the
location being copied to, it will be replaced with the new Cue. Follow below to copy Cue 1 to Cue 2.
Procedure:
1. Press [CUE] [1] [COPY] [2] [ENTER].
To copy a range of Cues:
e.g. Copy Cues 1 thru 5 to Cues 21 thru 25.
Procedure:
1. Press [CUE] [1] [THRU] [5] [COPY] [21] [ENTER].
Exchanging Cues
All levels and properties (name, times, etc.) of the Cues will be exchanged. Follow below to exchange
Cue 1 with Cue 2.
Procedure:
1. Press [CUE] [1] [COPY] [COPY] [2] [ENTER].
To exchange a range of Cues:
Procedure:
e.g. Exchange Cues 1 thru 5 with Cues 21 thru 25.
1. Press [CUE] [1] [THRU] [5] [COPY] [COPY] [21] [ENTER].
Deleting a Cue
Follow below to delete Cue 1.
Procedure:
1. Press [CUE] [1] [DELETE].
To delete a range of Cues:
1. Press [CUE] [1] [THRU] [5] [DELETE].
Rev. A
Notes:
[MDFY] key LED will light and "Mdfy Q1" will
appear in a red field in Status Line.
To abort modification, press [RST].
Notes:
Notes:
Notes:
Notes:
Notes:
Delete Cue Warning appears. Press
[DELETE] to proceed or [C] to cancel.
Page 25
Advertisement
Table of Contents
