To "GoTo" a cue in a cue list (the desired cue is placed as the next cue to execute):
Procedure:
1. Enter the cue number.
2. Press and hold [STEP].
3. Press [M#].
To re-start a cue list beginning with a blackout (the blackout cue is placed as the next cue to execute):
Procedure:
1. Press and hold [STEP].
2. Press [M#].
3. Release [STEP].
Modifying the Fade Rate
The fade rate in a Master can be modified from another Master that has been configured as a Rate
Master. To configure a Rate Master, press [MDFY] [FLMT] [10].
Loading Channels to Masters
The following procedure shows how to load Channels 1 thru 6 to Masters 1 thru 6.
Procedure:
1. Press [CHANNEL] [1] [THRU] [6].
2. Press [LOAD] [9] [M1].
The Masters Playback Display Area above shows Channels 1 thru 6 loaded in Masters 1 thru 6. A
Channel number is indicated by a "c" displayed beneath the Master number and level.
The Channels are loaded with the default fade time for all Channels (and Groups). To modify the
fade time, press [MENU] [30] and select Group/Ch T.
Loading Editor Content direct to Masters
A Master can be loaded with the Editor contents thus eliminating the step of recording the contents
first. The console automatically records the contents as a Group when the Master is loaded.
For example, to load Fixture 1's selected parameters directly to Master 1, follow below.
Procedure:
1. Select Fixture 1 Parameters.
2. Press [LOAD] [M1].
The Group is loaded with the default fade time for all Groups (and Channels). To modify the fade
time, press [MENU] [30] and select Group/Ch T.
Rev. A
Notes:
Notes:
Notes:
9: CHANNEL is selected from Options Window.
Notes:
Page 37