Selecting And Editing Fixtures; Basic Fixture Selections; Pre-Selecting Fixtures / Parameters; Clearing Fixtures / Parameters From The Editor - Leviton 8700 Series Quick Start Manual

Selecting and Editing Fixtures

A Fixture is composed of Parameters with each Parameter controlling a specific function (for example,
a color wheel) of the Fixture.
Fixtures being edited are color coded depending on their function:
Selected: The Fixture is currently being edited and has a red arrow next to its number.
Present: The Fixture is from a previous edit and has a brown arrow next to its number.
Fixture Parameters being edited are also color coded depending on their function:
Pre-Selected: The Parameter is waiting to be edited and its value appears in red.
Selected: The Parameter is currently being edited and its value appears in a red field.
Present: The Parameter is from a previous edit and its value appears in a brown field.
Note that all of the above be included when recording.

Basic Fixture Selections

[FIXTURE] [#]: Selects a single Fixture.
[FIXTURE] [#] [THRU] [#]: Selects a range of Fixtures.
[FIXTURE] [#] [THRU]: Selects a range of Fixtures to the last Fixture.
[FIXTURE] [#] [FIXTURE] [#] or [FIXTURE] [#] [ENTER] [#]: Selects non-sequential Fixtures.
[FIXTURE] [THRU] [THRU]: Selects all fixtures in the Editor and in active Playbacks.
The [EXCEPT] key is used to exclude a Fixture from a range. For example, [FIXTURE] [1] [THRU]
[20] [EXCEPT] [10] will exclude Fixture 10 from the selected range.
The [INVERT] key can be used to toggle between Selected and Present Channels and/or Fixtures.

Pre-Selecting Fixtures / Parameters

To Pre-Select Fixtures, press [ENTER] before editing values. For example, [FIXTURE] [#] [ENTER].
To Pre-Select Parameters, press [FIXTURE] [#] [ENTER] [PARAM] [#] [ENTER].

Clearing Fixtures / Parameters from the Editor

To release selected Fixtures (red field):
Press [RELEASE]: The Fixtures fade to 0% in 2 seconds.
Press [RELEASE] [RELEASE]: The Fixtures instantly fade to 0%.
To release present (brown field) and selected (red field) Fixtures:
[RST]: The Fixtures fade to 0% in 2 seconds.
[RST] [RST]: The channels instantly fade to 0%.
To release a Parameter of a selected Fixture, press [PARAM] then select the parameter type number
from the Options Window. For example, [PARAM] [#] [RELEASE].
Page 20 8700 Series Quick Start Guide