Table of Contents
Advertisement
Navigation
Mouse
In addition to connecting an external mouse, the Trackball can be configured for use as a mouse by
pressing the [MOUSE] key. Pressing the [TB] key returns to Trackball mode. The mouse can be used
to select data in Edit Tables and Options Windows (see below).
Edit Tables
Some screens contain Edit Tables which allow you to edit relevant data. An example of this would be
the following Cue List where data such as fade times and cue names are modified.
Use the [] [ ] [ ] [ ] keys or mouse for navigation and selection. To move the cursor to the
Setup Line at the top of the screen, press [MENU] or use the mouse.
Most of the Edit Tables have a numbered gray column on the left which allows for quick numerical
selection of a data line. For example, to move from Cue 1 to Cue 100 in the Cue List, place the cursor
over Cue 1 then press [100] [ENTER].
A data line that has an active data cell is highlighted in yellow with the selected data cell highlighted in
brown. When the data is being edited, the data cell turns red. To accept the data, press [ENTER] or
move the cursor to another cell. Press [C] to cancel.
Options Windows
To select items in Options Windows: Enter the option number, then press [ENTER] or select with the
mouse. Examples of Options Windows:
Rev. A
Data Cell
Setup Line
Page 9
Advertisement
Table of Contents
