Table of Contents
Advertisement
Chapter 4
♦
Splash Screen – [Disabled] or [Enabled]
The Splash Screen is a graphical image displayed as the default (Ampro Splash Screen) or a
user customized image on screen. Refer to the Splash Screen Customization topic later in this
chapter for instructions on how to customize the splash screen.
∗ If Splash Screen is [Enabled] it stays on screen, until the booted Operating System
changes it, if the Config Box option is Disabled.
∗ If Config Box option is [Enabled], the Splash Screen stays on screen until the Config Box
is displayed.
Memory Control Options
• Memory
♦
Memory Test – [Fast], [Standard], or [Exhaustive]
∗ If this field is set to [Fast], only basic memory tests are performed during POST to shorten
POST time.
∗ If this field is set to [Standard], more than basic tests are performed, but POST time is
increased.
∗ If this field is set to [Exhaustive], more rigorous tests are performed on memory, but this
takes a significant amount of time for POST to complete.
♦
Memory Hole – [Disabled], or [1MB]
This field specifies the size of an optional memory hole, below 16MB. Access to the memory
addresses inside the memory hole region are forwarded to the PC/104 bus, where memory
mapped PC/104 devices have access.
♦
Shadow D000-D3FF – [Disabled] or [Enabled]
These Shadow fields specify if BIOS option ROMs in the indicated segments should be
shadowed to RAM. Shadowing option ROMs can potentially speed up the operation of the
system. The indicated segments are only for option ROMs present on add-on PC/104 and
PC/104-Plus cards.
♦
Shadow D400-D7FF – [Disabled] or [Enabled]
♦
Shadow D800-DBFF – [Disabled] or [Enabled]
♦
Shadow DC00-DFFF – [Disabled] or [Enabled]
Power Management and Advanced User Options
• Power Management
♦
ACPI – [Disabled] or [Enabled]
If this field is set to [Enabled], the Advanced Configuration and Power Interface API is turned on.
♦
APM – [Disabled] or [Enabled]
If this field is set to [Enabled], the Advanced Power Management API is turned on.
• Advanced features
♦
Post Memory Manager – [Disabled] or [Enabled]
If this field is set to [Enabled], the Post Memory Manger API is turned on. The Post Memory
Manger can be used by BIOS option ROMs to allocate memory in a well defined way.
♦
CPU Serial Number – [Disabled] or [Enabled]
If this field is set to [Enabled], the internal serial number in the Intel CPU is accessible by the
Operating System and/or Applications that can make use of this information.
66
Reference Manual
BIOS Setup
LittleBoard 800
Advertisement
Table of Contents
