Ampro LittleBoard800 Reference Manual page 78

Chapter 4
♦
Assign IRQ 6 – [Disabled] or [Enabled] (Typically Floppy Disk)
∗ If this field is set to [Enabled], then the BIOS can assign this IRQ to a Plug and Play
adapter.
∗ If another device in the system is using this IRQ, then this field should be set to
[Disabled].
♦
Assign IRQ 7 – [Disabled] or [Enabled] (Typically LPT1)
∗ If this field is set to [Enabled], then the BIOS can assign this IRQ to a Plug and Play
adapter.
∗ If another device in the system is using this IRQ, then this field should be set to
[Disabled].
♦
Assign IRQ 9 – [Disabled] or [Enabled] (Typically unused)
∗ If this field is set to [Enabled], then the BIOS can assign this IRQ to a Plug and Play
adapter.
∗ If another device in the system is using this IRQ, then this field should be set to
[Disabled].
♦
Assign IRQ 10 – [Disabled] or [Enabled] (Typically unused)
∗ If this field is set to [Enabled], then the BIOS can assign this IRQ to a Plug and Play
adapter.
∗ If another device in the system is using this IRQ, then this field should be set to
[Disabled].
♦
Assign IRQ 11 – [Disabled] or [Enabled] (Typically ISA Bridge/Native IDE)
∗ If this field is set to [Enabled], then the BIOS can assign this IRQ to a Plug and Play
adapter.
∗ If another device in the system is using this IRQ, then this field should be set to
[Disabled].
♦
Assign IRQ 12 – [Disabled] or [Enabled] (Typically PS/2 Mouse)
∗ If this field is set to [Enabled], then the BIOS can assign this IRQ to a Plug and Play
adapter.
∗ If another device in the system is using this IRQ, then this field should be set to
[Disabled].
♦
Assign IRQ 14 – [Disabled] or [Enabled] (Typically Hard Disk)
∗ If this field is set to [Enabled], then the BIOS can assign this IRQ to a Plug and Play
adapter.
∗ If another device in the system is using this IRQ, then this field should be set to
[Disabled].
♦
Assign IRQ 15 – [Disabled] or [Enabled] (Typically Hard Disk)
∗ If this field is set to [Enabled], then the BIOS can assign this IRQ to a Plug and Play
adapter.
∗ If another device in the system is using this IRQ, then this field should be set to
[Disabled].
72 Reference Manual
BIOS Setup
LittleBoard 800