Ampro LittleBoard800 Reference Manual page 10

Chapter 1
• ReadySystem™ – This complete, low cost, turn-key system gives you a choice of ReadyBoard
high performance, low power, SBCs with RAM installed plus a hard disk drive (HDD) pre-
loaded with a choice of operating systems powered by a 150W ATX power supply. Each
ReadySystem provides standard peripherals, including video, serial, parallel, PS/2 keyboard and
mouse interfaces, Ethernet and USB ports, and sound available through the front I/O panel. A
CompactFlash socket is accessible through a protective cover and two optional PC/104 modules
can be accessed through panel cutouts for PC/104 expansion I/O.
• ETX Family – These high-performance, compact Computer-on-Module (COM) solutions use
various x86 processors from VIA Eden ESP to Pentium M CPUs in an ETX form factor to plug
into your custom baseboard. Each ETX module provides standard peripherals, including dual
Ultra/DMA 33/66/100 IDE, floppy drive interface, PCI bus, ISA bus, serial, parallel, PS/2
keyboard and mouse interfaces, 10/100BaseT Ethernet, USB ports, Video, and AC'97 sound.
Optional –40°C to +85°C operation is available to meet your application requirements.
• EnCore™ Family - These high-performance, compact, Computer-on Module (COM) solutions
use various processor technologies including Intel x86, MIPS, and PowerPC architectures to plug
into your custom baseboard. Each EnCore module provides standard peripherals, including
Ultra/DMA 33/66/100 IDE, floppy drive interface, PCI bus, serial, parallel, PS/2 keyboard and
mouse interfaces, 10/100BaseT Ethernet, and USB ports. Some EnCore modules also provide
video and AC'97 sound. Depending on the model, EnCore modules support up to 256MB or
512MB of SODIMM DRAM.
4 Reference Manual
About this Manual
LittleBoard 800