Ampro LittleBoard800 Reference Manual page 79

Chapter 4
♦
Assign DMA 0 – [Disabled] or [Enabled]
∗ If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and
Play adapter.
∗ If another device in the system is using this DMA channel, then this field should be set to
[Disabled].
♦
Assign DMA 1 – [Disabled] or [Enabled]
∗ If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and
Play adapter.
∗ If another device in the system is using this DMA channel, then this field should be set to
[Disabled].
♦
Assign DMA 2 – [Disabled] or [Enabled]
∗ If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and
Play adapter.
∗ If another device in the system is using this DMA channel, then this field should be set to
[Disabled].
♦
Assign DMA 3 – [Disabled] or [Enabled]
∗ If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and
Play adapter.
∗ If another device in the system is using this DMA channel, then this field should be set to
[Disabled].
♦
Assign DMA 5 – [Disabled] or [Enabled]
∗ If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and
Play adapter.
∗ If another device in the system is using this DMA channel, then this field should be set to
[Disabled].
♦
Assign DMA 6 – [Disabled] or [Enabled]
∗ If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and
Play adapter.
∗ If another device in the system is using this DMA channel, then this field should be set to
[Disabled].
♦
Assign DMA 7 – [Disabled] or [Enabled]
∗ If this field is set to [Enabled], then the BIOS can assign this DMA channel to a Plug and
Play adapter.
∗ If another device in the system is using this DMA channel, then this field should be set to
[Disabled].
LittleBoard 800 Reference Manual
BIOS Setup
73