Resolving A Ribbon Rfid Error (Ribbon Rfid Sensor Is Corrupted) - Fargo DTC300 User Manual

RESTRICTED USE ONLY

Resolving a Ribbon RFID Error (Ribbon RFID Sensor is Corrupted)

All Troubleshooting procedures assume that only factory-authorized supplies are in use in
the Printer.
Step Procedure
1 Review the following information.

Symptom: Printer RFID Sensor does not detect a recognizable signal from
the Ribbon.

Printer Error State: The Ribbon tag information is corrupted or incorrect.

LCD Error Display: Ribbon RFID Error

Driver Monitor Error Display: Ribbon RFID Error
2 Replace the Print Ribbon RFID Sensor.
a. Replace the Print Ribbon RFID Sensor.
b. Press on the Resume button.
c. If the error continues, replace the Printer Main Board.
DTC300/DTC300M Card Printer/Encoder User Guide (Rev. 2.2)
Fargo Electronics, Inc.
4-13