2.2.16
Wafer for Power ON/OFF (CN17)
When you plug-in the adapter and this wafer is shorted by a jumper, the
system will power-on. Or you also can connect this wafer with an external
button to control the power ON/OFF.
Note: If your system cannot power-on with an adapter, please check this
wafer (CN17) in advance. It should be had a jumper or external button on
it.
Pin
1
Figure 2-21 Pin Header for Power Button
Description
Pin
PWR_BTN+
31
Description
2
PWR_BTN-
RSB-4210 Evaluation Kit User Manual