Change The Boot Logo - Advantech RSB-4210 Evaluation Kit User Manual

Figure 3-4 Selecting Seiko Instruments S-35390A
9. Go to folder "source/linux-2.6.35.3/arch/arm/mach-mx5", and edit the
"mx53_smd.c", to add these codes
Figure 3-5 Integrate Code for Seiko Instruments S-35390A
10. Then you can refer chapter 3.3.2 to rebuild the kernel with RTC driver (Seiko
Instruments S-35390A).
Note! If you cannot find any drivers that can drive your hardware, you have to
contact with hardware vender.
3.4.2

Change the Boot Logo

System will show the boot logo when booting. This section will guide how to
change the boot logo. Please refer following steps.
1. You have to download and install "netpbm" package. Type "#sudo apt-get
install netpbm" to install it.
2. Prepare a picture for boot logo. For example: bootlogo.png (Under folder
Desktop/bootlogo)
.
61 RSB-4210 Evaluation Kit User Manual