1. Manuals
  2. Brands
  3. Advantech Manuals
  4. Motherboard
  5. RSB-4680
  6. User manual

Advantech RSB-4680 User Manual

Risc-based 3.5" sbc with rockchip arm cortex-a17 rk3288 quad core processer
Hide thumbs
Table of Contents

Advertisement

Quick Links

User Manual
RSB-4680
RISC-Based 3.5'' SBC with
ROCKCHIP ARM® Cortex®-A17
RK3288 Quad Core processer

Advertisement

Table of Contents
loading

Related Manuals for Advantech RSB-4680

Summary of Contents for Advantech RSB-4680

  • Page 1 User Manual RSB-4680 RISC-Based 3.5'' SBC with ROCKCHIP ARM® Cortex®-A17 RK3288 Quad Core processer...
  • Page 2 No part of this manual may be reproduced, copied, translated or transmitted in any form or by any means without the prior written permission of Advantech Co., Ltd. Information provided in this manual is intended to be accurate and reliable. How- ever, Advantech Co., Ltd.
  • Page 3 Consult the dealer or an experienced radio/TV technician for help. Ordering Information Part No. Description RSB-4680CQ-XNA1E RSB-4680 3.5’’ SBC ROCKCHIP RK3288 Quad 1.6GHz Packing List Before installation, please ensure the following items have been shipped.  1 x RSB-4680 3.5’’ motherboard ...
  • Page 4 WIFI /BT4.0 Module RTL8723BS SDIO 1750007965-01 Antenna Cable R/P SMA (M) to MHF4, 300mm 1750008671-01 Dipole Ant.SMA/M-R 2.4/5G 2.5/4dBi BLK 109mm 968AD00081 Qucetel EC20CEFA Mini-PCIe 4G module 1750006264 Antenna cable SMA(F)/MHF 15cm 1750007990-01 Antenna 4G/LTE full band L=11 cm 50 Ohm RSB-4680 User Manual...
  • Page 5 The equipment has been dropped and damaged. The equipment has obvious signs of breakage. DISCLAIMER: This set of instructions is given according to IEC 704-1. Advantech disclaims all responsibility for the accuracy of any statements contained herein. Safety Precaution – Static Electricity Follow these simple precautions to protect yourself from harm and the products from damage.
  • Page 6 RSB-4680 User Manual...

  • Page 7: Table Of Contents

    Connector Settings ..............11 Mechanical ....................26 2.3.1 Jumper and Connector Locations ..........26 2.3.2 Board Dimensions............... 28 LED ......................29 Quick Start of RSB-4680................. 29 2.5.1 Debug Port Connection............... 29 2.5.2 Debug Port Setting..............29 Chapter Software Functionality ......31 Introduction .....................
  • Page 8 3.10.4 Ethernet ..................46 Chapter Advantech Services......49 RISC Design-in Services ................ 50 Contact Information................. 53 Global Service Policy ................54 4.3.1 Warranty Policy................54 4.3.2 Repair Process ................55 RSB-4680 User Manual viii...

  • Page 9: Chapter 1 General Introduction

    Chapter General Introduction This chapter gives background information on the RSB-4680. Sections include:  Introduction  Specifications...

  • Page 10: Introduction

    HDMI. RSB-4680 also features Mini-PCIe, M.2 and SIM card slots for integrating Wi-Fi, Bluetooth and 4G modules. The RSB-4680 offers rich I/O connectivity with 6 USB 2.0, 6 COM, 8 GPIOs. The sys- tem also supports dual display for LVDS, HDMI and VGA.

  • Page 11: Mechanical Specifications

    – Normal discharge capacity: 210 mAh Environmental Specifications  Operating temperature: 0~60°C (32~140°F)  Operating humidity: 5% ~ 95% relative humidity, non-condensing  Storage temperature: -40~85°C (-40~185°F)  Storage humidity: 60°C @ 95% RH Non-condensing Block Diagram RSB-4680 User Manual...
  • Page 12 RSB-4680 User Manual...

  • Page 13: Chapter 2 H/W Installation

    Chapter H/W Installation This chapter gives mechanical and connector information on the RSB-4680. Sections include:  Jumper Information  Connector Information  Mechanical Drawing  Quick Start Guide...

  • Page 14: Jumpers

    LVDS Backlight Power Jumper LVDS_VDD1 LVDS Power Jumper1 LVDS_VDD2 LVDS Power Jumper2 AT & ATX Mode Switch COM6 & COM7 5V/12V Power Select CN18 RS485 Impedance Select & Console Select CN19 MASKROM Mode Select JSETCOM4 COM4 RS232/RS485 Mode Select RSB-4680 User Manual...

  • Page 15: Jumper Setting

    Footprint HD_3x1P_79_D Description PIN HEADER 3x1P 2.0mm 180D(M) DIP 2000-13 WS Setting Function (1-2) 3.3V (2-3) 5V(default) LVDS_VDD2 LVDS Power Jumper2 Part number 1653002101-02 Footprint PH2x1P-2.0 Description PIN HEADER 2x1P 2.0mm 180D(M) DIP 21N12050 Setting Function (1-2) RSB-4680 User Manual...
  • Page 16 RS485 Impedance mode and Console mode Selection Part Number 1653003260 Footprint HD_3x2P_79 Description PIN HEADER 3x2P 2.0mm 180D(M) SMD 21N22050 Setting Pin Name (1-3) COM2 RS232 (2-4) COM4 RS485 Impedance off (default) (3-5) Console (default) (4-6) COM4 RS485 Impedance on RSB-4680 User Manual...
  • Page 17 Disable eMMC (2-3) Enable eMMC(default) JSETCOM4 COM4 RS232/RS485 Mode Select Part number 1653007260 Footprint HD_7x2P_79 Description PIN HEADER 2x7P 2.0mm 180D(M) SMD 21N22050 Setting Function (2-4 8-10 11-13 12-14) RS232 mode (default) (1-2 5-7 6-8 9-11) RS485 mode RSB-4680 User Manual...

  • Page 18: Connectors

    CN21 CN22 Internal RS232 (COM6 & COM7 with 12V/5V Power) COM13 Internal RS232 (COM1 & COM3) COM4 External COM (With RS232 &RS-485) DEBUG COM2 or Console HDMI HDMI MINIPCIE MINIPCIE Micro SD SIM1 Standard SIM Reset Button RSB-4680 User Manual...

  • Page 19: Connector Settings

    2.2.2 Connector Settings 2.2.2.1 RTC Battery Connector (BAT) RSB-4680 supports a lithium 3V/210mAH CR2032 battery with wire via battery con- nector. Pin Name COIN_RTC 2.2.2.2 Audio (CN2) RSB-4680 supports Line-out stereo speakers, MIC in and speaker out. Earphone can be connected to the lineout pin header, and microphone can be connected to the MIC in pin header.
  • Page 20 2.2.2.4 LVDS Connector (CN4) RSB-4680 provides a LVDS 20x2-pin board-to-board connector for dual channel 18/ 24/30 bit LVDS panel up to 1920 x 1080. For avoid to damage LCD panel, please make sure set a right voltage level before power on while connecting a LVDS panel (refer to jumper setting description for LVDS_BLP, LVDS_VDD1 and LVDS_VDD2 and LCD datasheet that you will use).
  • Page 21 LVDS_BLP and LCD datasheet that you will use). Pin Name +VDD_BKLT_LVDS LVDS_BKLT_EN LVDS_BKLT_PWM VCC_SYS(+5V) LVDS Backlight Connector 2.2.2.6 Power Button & LED (CN5) RSB-4680 supports power button, power LED light and 4G LED light by 2x3 pin header. Pin Name PWR BTN(PWR_BTN+) GND(PWR_BTN-) PWR_LED(PWR_LED+) GND(PWR_LED-) +3.3V_PCIe(4G_LED+) 4GLED_WWAN#(4G_LED-)
  • Page 22 RSB-4680 provides a 1X2 pin header for Recover Signal. Description RECOVER Recover signal pin header 2.2.2.8 DC Power Jack (CN16) RSB-4680 supports a DC-Jack header that can be connected 12V DC external power input. Description +12V PGND PGND DC Jack...
  • Page 23 +5V_USB12 USB1_D- USB2_D- USB1_D+ USB2_D+ USB5_D- +5V_USB5 USB5_D+ GND_Shielding GND_Shielding USB Pin header 2.2.2.10 USB Type A Connector (USB34) RSB-4680 supports one standard USB2.0 Type A connector on the coastline. Description +5V_USB34 USB3_D- USB3_D+ +5V_USB34 USB4_D- USB4_D+ RSB-4680 User Manual...
  • Page 24 USB port connector 2.2.2.11 Micro USB Connector (OTG) RSB-4680 supports one USB OTG port on the coastline. Description OTG5V USB_OTG_D- USB_OTG_D+ Micro USB Connector RSB-4680 User Manual...
  • Page 25 2.2.2.12 SPI (CN21) RSB-4680 provides one SPI pin header. Description VCC_IO(3.3V) SPI_CS0# SPI_CLK SPI_MOSI SPI_MISO SPI Pin header 2.2.2.13 C (CN22) RSB-4680 provides one I C pin header. Description +3.3V Touch_INT# C4_SCL C4_SDA C Pin header RSB-4680 User Manual...
  • Page 26 COM4_TX_a COM4_RTS COM4_CTS COM Port 2.2.2.15 RS232/Debug Port (COM2) RSB-4680 can communicate with a host server (Windows or Linux) by using debug cable. (Advantech number: 1700021565-11). Refer to jumper CN18. Description COM2_TX COM2_RX Debug port/Internal RS232 pin header RSB-4680 User Manual...
  • Page 27 2.2.2.16 Internal RS232 (COM) RSB-4680 provides 2 x internal 4 wires RS-232 ports with 5V/12V selection. (Refer to Jumper CN6). Description COM6_TXD COM6_RXD COM6_RTS# COM6_CTS# COM6_PWR COM7_PWR COM7_CTS# COM7_RTS# COM7_RXD COM7_TXD Internal RS232 Pin header 2.2.2.17 Internal RS232 (COM13) RSB-4680 provides 2 x internal 4 wires RS-232 ports.
  • Page 28 2.2.2.18 HDMI Display Interface (HDMI) RSB-4680 provides one HDMI interface connector. HDMI technology can support a maximum resolution of 3840 x 2160, but the actual resolution supported depends on the monitor being used. Description Description HDMI _D2+ HDMI _CLK- HDMI _D2-...
  • Page 29 2.2.2.19 Ethernet Connector (LAN) RSB-4680 provides one RJ45 LAN interface connector, which are compliant with 1000 base-T IEEE 802.ab, 100 base-TX IEEE 802.u, 10 base-t IEEE 802.3. The Ethernet ports provide standard RJ-45 jack connector with LED indicators on the front side to show Active/Link status and Speed status.
  • Page 30 2.2.2.20 M.2 Slot (M.2) RSB-4680 supports M.2 2230 Key.E slot with SDIO, I2C and USB interface. Signal Name Signal Name +3.3V_M2 USB_M.2_P +3.3V_M2 USB_M.2_N WLAN_LED M2_SDIO_CLK M2_SDIO_CMD M2_SDIO_DAT0 M2_SDIO_DAT1 BT_LED M2_SDIO_DAT2 M2_SDIO_DAT3 M2_SDIO_WAKE# UART0_RX M2_SDIO_B_RST Mechanical Key Mechanical Key Mechanical Key...
  • Page 31 2.2.2.21 Mini PCIE RSB-4680 supports Mini-PCIE interface. Signal Name Signal Name +3.3V_PCIe UIM_PWR UIM_DATA UIM_CLK UIM_RST UIM_VPP W_DISABLE# PERST# USB_MINIPCIE_N USB_MINIPCIE_P +3.3V_PCIe +3.3V_PCIe LED_WWAN# LED_WLAN# LED_WPAN# +3.3V_PCIe RSB-4680 User Manual...
  • Page 32 MINI-PCIe 2.2.2.22 Micro SD Slot (SD) RSB-4680 supports SD/MMC card in Class2, 4, 6, 8, 10. Supported capacity is up to 32GB (SDHC). Advantech used 4G SD for DQA test (SDHC). Signal Name SD_DAT2 SD_DAT3 SD_CMD VCC_SD SD_CLK SD_DAT0 SD_DAT1...
  • Page 33 2.2.2.23 SIM Card Slot (SIM1) RSB-4680 supports on board SIM socket is for 4G integration. Please insert valid SIM card to dial to 4G network. Description SIM_VCC SIM_RST SIM_CLK SIM_VPP SIM_DATA SIM Card Slot 2.2.2.24 Reset button (SW2) RSB-4680 supports a reset button on the coastline.

  • Page 34: Mechanical

    2.2.2.25 VGA Display Interface (VGA) RSB-4680 provides standard VGA connector. VGA resolution supports up to 1920x1200. Description Description +5V_CRT GREEN BLUE DDC_DATA HSYNC VSYNC DDC_CLK VGA Connector Mechanical 2.3.1 Jumper and Connector Locations RSB-4680 User Manual...
  • Page 35 RSB-4680 User Manual...

  • Page 36: Board Dimensions

    2.3.2 Board Dimensions 2.3.2.1 Board Drawing unit: mm Board Dimension Layout (Top Side) unit: mm RSB-4680 User Manual...

  • Page 37: Led

    Open HyperTerminal on your Windows PC, and select the settings as shown in Figure 2.7. After the bootloader is programmed on SD card, insert power adapter connector to DC jack on RSB-4680 to power up the board. The boot loader prompt is dis- played on the terminal screen. RSB-4680 User Manual...
  • Page 38 HyperTerminal Settings for Terminal Setup RSB-4680 User Manual...

  • Page 39: Chapter 3 Software Functionality

    Chapter Software Functionality This chapter details the software programs on the RSB-4680 plat- form.

  • Page 40: Introduction

    The purpose of this chapter is to introduce software development of RSB-4680 to you, so that you can develop your own application(s) efficiently. RSB-4680 is designed for supporting Linux host only so you may fail developing your AP on Windows/Android host PC. For now the official supported host version is Ubuntu 14.04 LTS 64bit, host PC in any other version may have compatibility issue.

  • Page 41: Building Android 6.0.1 Image

    $ source build/envsetup.sh Execute the Android lunch command. In this example, the setup is for the production image of Advantech RISC platform device with user debug type. If you devices is RSB4680, you will be send command "lunch rsb4680-userdebug $ lunch $PRODUCT-userdebug...

  • Page 42: Gpio

    Export GPIO then you can use control GPIO from user space through sysfs. Export GPIO0 shell@rsb4680:/ $ echo 219 > /sys/class/gpio/export Set GPIO direction to in/out shell@rsb4680:/ $ echo "out" > /sys/class/gpio/gpio219/direction Set GPIO value 0/1 if GPIO pin define is output shell@rsb4680:/ $ echo 1 > /sys/class/gpio/gpio219/value RSB-4680 User Manual...
  • Page 43 Change GPIO 219 to 1 and read GPIO 220 value shell@rsb4680:/ $ echo 1 > /sys/class/gpio/gpio219/value shell@rsb4680:/ $ cat /sys/class/gpio/gpio220/value Change GPIO 219 to 0 and read GPIO 220 value shell@rsb4680:/ $ echo 0 > /sys/class/gpio/gpio219/value shell@rsb4680:/ $ cat /sys/class/gpio/gpio220/value RSB-4680 User Manual...

  • Page 44: Uart

    The COM2 defaults to the debug console, which can be switched to RS232 by pin- header, short circuit CN18 1 and 3. CN18 (1-3) CONSLE CN18 (3-5) COM4 RS485 Impedance On CN18 (4-6) COM4 RS485 Impedance Off Cn18 (2-4) RSB-4680 User Manual...

  • Page 45: Audio

    Audio Launch “Sound Recorder” for MIC Launch “Video” for Audio RSB-4680 User Manual...

  • Page 46: Sd/Mmc Card

    Browse the SD Android 6 Marshmallow also includes a built-in file manager feature to browse the SD card. Launch the Settings app.  Tap on Storage & USB.   Tap on SD card to explore the files. RSB-4680 User Manual...

  • Page 47: Usb Disk

    USB DISK 3.7.1 USB Disk Status RSB-4680 User Manual...
  • Page 48 RSB-4680 User Manual...

  • Page 49: Hdmi

    HDMI 3.8.1 HDMI resolution Starting Android, Entry Settings->HDMI->HDMI Resolution Note! RSB-4680 supports HDMI 2.0, the max resolution can up to 3840 x 2160@ 60Hz Monitor Model: Acer S277HK Samsung UA55KU6310JXXZ 3.8.2 HDMI Audio When HDMI monitor supports audio, the default output is from HDMI audio only.

  • Page 50: Multi-Display

    # setenv prmry_screen edp-1024x768 rkboot # setenv extend_screen lvds-g070vw01 LVDS optional: lvds-g070vw01 (800*480), vds-g150xgel05 (1024*768), lvds-  g215hvn01 (1920*1080 dual), lvds-p460hvn02 (1920*1080 dual 30bits), lvds- lmt101dnmfdd (1024*600), lvds-lmt150dngfdd (1024*768)  HDMI optional: hdmi-720p?hdmi-1080p  VGA(edp) optional: edp-1024x768, edp-1920x1080, edp-1920x1200 RSB-4680 User Manual...

  • Page 51: Network Setup

    3.10 Network Setup 3.10.1 WIFI Click Settings Turn on Wi-Fi Choose ESSID (for example, Advantech for guest) RSB-4680 User Manual...
  • Page 52 Input correct password. Wi-Fi connected 3.10.2 Click Settings, switch the Bluetooth switch to ON to turn on Bluetooth: Click any available devices to pair with. After pairing successfully you can now communicate. RSB-4680 User Manual...

  • Page 53: G/4G

    3.10.3 3G/4G Insert SIM card, restart If you can’t connect to the network, please check the following settings: A. Settings/More/Cellular networks/ Access Point Names, then Correct. RSB-4680 User Manual...

  • Page 54: Ethernet

    There are two of IP setting: DHCP IP and static IP DHCP IP - configuration is controlled by system. Static IP - There are five fields need to be filled: IP Address, netmask ,getway dns1 and dns2. RSB-4680 User Manual...
  • Page 55 RSB-4680 User Manual...
  • Page 56 RSB-4680 User Manual...

  • Page 57: Chapter 4 Advantech Services

    Chapter Advantech Services This chapter introduces Advan- tech design in serviceability, tech- nical support and warranty policy for RSB-4680 evaluation kit...

  • Page 58: Risc Design-In Services

    Easy Development Advantech has support firmware, root file-system, BSP or other develop tools for cus- tomers. It helps customers to easy develop their carrier board and differentiate their embedded products and applications.
  • Page 59 Advantech has been involved in the industrial computer industry for many years and found that customers usually have the following questions when implementing modu- lar designs.
  • Page 60 RISC COM. Design stage When a product moves into the design stage, Advantech will supply a design guide of the carrier board for reference. The carrier board design guide provides pin defini- tions of the COM connector with limitations and recommendations for carrier board design, so customers can have a clear guideline to follow during their carrier board development.

  • Page 61: Contact Information

    RISC platforms usually have less support for ready-made drivers on the carrier board, therefore the customer has to learn from trial and error and finally get the best solution with the least effort. Advantech’s team has years of experience in customer support and HW/SW development knowledge. Conse- quently, we can support customers with professional advice and information as well as shortening development time and enabling more effective product integration.

  • Page 62: Global Service Policy

    (Dead-on-Arrival). The DOA Cross-Shipment excludes any shipping damage, cus- tomized and/or build-to-order products. For those products which are not DOA, the return fee to an authorized ADVANTECH repair facility will be at the customers' expense. The shipping fee for reconstructive products from ADVANTECH back to customers' sites will be at ADVANTECH's expense.

  • Page 63: Repair Process

    "Problem Description". Vague entries such as "does not work" and "failure" are not acceptable. If you are uncertain about the cause of the problem, please contact ADVANTECH's Application Engineers (AE). They may be able to find a solution that does not require sending the product for repair.
  • Page 64 Product updates and tests upon the request of customers who are without war- ranty. If a product has been repaired by ADVANTECH, and within three months after such a repair the product requires another repair for the same problem, ADVANTECH will do this repair free of charge.
  • Page 65 4.3.2.6 Shipping Back to Customer The forwarding company for RMA returns from ADVANTECH to customers is selected by ADVANTECH. Per customer requirement, other express services can be adopted, such as UPS, FedEx and etc. The customer must bear the extra costs of such alternative shipment.
  • Page 66 No part of this publication may be reproduced in any form or by any means, electronic, photocopying, recording or otherwise, without prior written permis- sion of the publisher. All brand and product names are trademarks or registered trademarks of their respective companies. © Advantech Co., Ltd. 2018...

Table of Contents