Table of Contents
Advertisement
2.19 ATX Power Connectors (CN15, CN17)
There are two power connectors on the motherboard for leads from an
ATX power supply. The power supply leads plug into the connectors.
The connector designs prevent incorrect orientation. There are two con-
nectors, the standard 20-pin ATX connector and the extra ATX 12V 4-pin
connector which supplies additional 12-volt current.
2.20 Internal USB 5/6 Port Connector (CN14)
The board provides two additional Hi-Speed USB 2.0 ports that have
their own root hub. They are directly on the board for connecting internal
USB 2.0 devices.
2.21 PCI Slots (PCI1, PCI2)
This motherboard has three Bus Master capable PCI expansion slots. The
slots are 32-bit, 33MHz slots and are PCI 2.2-compliant. The slots pro-
vide a fast high-bandwidth pathway between the motherboard and expan-
sion cards.
2.22 Panel Inverter Connector (CN30)
The board provides a Panel Inverter Connector.
2.23 Internal Speaker Connector (CN10)
The board provides a 4-pin connector for an internal speaker.
2.24 SATA Connectors (SA1, SA2)
The board provides two SATA connectors. SATA connector provides the
opportunity for devices to be plugged.
2.25 Digital I/O Connector (CN20)
The board supports 8-bit GPIO through DIO connector. The 8 digital in-
and out-puts can be programmed to read or control devices. The default
setting is 4 bits input and 4 bits output.
17
Chapter 2
Advertisement
Table of Contents
