Wafer For Battery Charger Board - Power (Bat_Cn1) - Advantech RSB-4210 Evaluation Kit User Manual

2.2.27 Wafer for Battery Charger Board – Power (BAT_CN1)
This wafer provides the power to battery charger board. +VIN_ADP is the
voltage from adapter to battery charge board; +VIN is the voltage from
battery charge board to RSB-4210. The pin assignment is shown as
following.
Figure 2-32 Wafer for Battery Charger Board – Power
Pin
1
+VIN_ADP (For Battery)
3
5
+VIN (For RSB-4210)
RSB-4210 Evaluation Kit User Manual
Description Pin
2
4
GND
6
42
Description
+VIN_ADP (For Battery)
GND
+VIN (For RSB-4210)