Rsb-4210 Connectors - Advantech RSB-4210 Evaluation Kit User Manual

2.2

RSB-4210 Connectors

The following table shows the connector list of RSB-4210.
Connector
CN 1 Wafer for 4-wire Resistive Type Touch Screen
CN 2 Phoenix Connector for CAN Bus
CN 3 Phoenix Connector for COM3, RS-485
CN 4 System Bus
CN 5 Pin Header for COM5, RS-232 (TX/RX/RTS/CTS)
CN 6 Pin Header for COM4, 3.3V TTL (TX/RX/RTS/CTS)
CN 7 Pin Header for I2S
CN 8 LVDS0 LCD Connector
CN 9 Pin Header for COM1, RS-232 (TX/RX)
CN 10 Pin Header for SD2
CN 11 Wafer for Backlight Power and Controller
CN 12 MiniPCIe Connector-Latch
CN 13 MiniPCIe Connector
CN 14 LVDS1 LCD Connector
CN 15 Pin Header for Jtag
CN 16 Wafer for SATA Power
CN 17 Wafer for Power ON/OFF
CN 18 Ethernet LAN1&2 Connector
CN 19 Wafer for Coin Battery
CN 20 SIM Card Slot
RST_BTN1 Pin Header for Reset
SUS_BTN1 Pin Header for Suspend
KEYPAD1 Pin Header for Matrix Keypad
CN21 Pin Header for I2C/SPI
GPIO1 Pin Header for 20x pins GPIO
SATA_CN1 SATA Connector
USB1 Pin Header for USB_HUB1
BAT_CN1 Wafer for Battery Charger Board – Power
BAT_CN2 Wafer for Battery Charger Board – Control Signal
USB_OTG1 USB OTG MINI-AB Connector
USB2 USB_HUB_2&3 (Standard Type-A)
CRT1 VGA Connector
HDMI_CN1 HDMI Connector
AUDIO1 Box Header for LINE-OUT, LINE-IN, MIC-IN and L&R Speakers
COM1 D-Sub9 Connector for COM2, RS-232 (TX/RX/RTS/CTS)
DCIN1 DC-IN Power Jack
SD1 SD Card Slot
Description
13 RSB-4210 Evaluation Kit User Manual