Re-Setting Function - Zephyr Trapeze CTP-E 48SX Use And Installation Manual

Filter Clean Reminder (Standard Ba e Filters tted):
A set of ba e lters are tted by the factory. These Ba e Filters are intended to lter out residue from cooking. They
need not be replaced on a regular basis but are required to be kept clean. The Filter Clean Reminder
the microprocessor will automatically indicate by a
every 30 hrs. of use. Filters can be cleaned by hand with non-abrasive soap or in a dishwasher.
Filter Clean Reminder:
When ashes on display, the ba e
lters installed are required to be cleaned.
This will occur after every 30 hours of use.

Re-setting Function:

Reset the Filter Clean Reminder timer when
lters are cleaned and re-installed (with
hood o ). Press and hold
5 seconds, the display will appear; hold for
approximately 5 seconds until
play disappears . The Filter Clean
Reminder function is now re-set and a new
30 hours elapse cycle is initiated.
ashing when the metal lters need to be cleaned after
for approx.
on dis-
16
Clean Filters
display <A> flashes
To Reset
display from <C> to < >
hold 5 secs.
function in