Zephyr Trapeze CTP-E 48SX Use And Installation Manual page 17

1. Blower On/O
By pressing , the blower is switched On and O .
2. Speed Selection
The 3 speed levels are selected by presing
level selected.
3. Delay O
This is used for programmed shut down of blower and lights 15 minutes after the function is activated. Press
a dot ashes in the lower right hand side of display
in 15 minutes.
4. Lights On/O /Dim
Switch lights On and O by pressing key
5. Advance Display Functions
Filters Clean Reminder (Ba e):
After every 3 0 hours of use, the display will start ashing an
possible clogs.
The standard Ba e Filters are required to be cleaned frequently and as recommended in order to maintain blower
e ciency. If improperly maintained, residue from cooking will sift though lters and cause damage to hood blowers
and other sensitive components; and possibly clog duct w ork and create a re hazard.
to decrease and to increase speed level. T
indicating the function is on. The hood will completely shut down
once. To dim lights, press
reminding you to clean the ba e lters from residue and
18
www.zephyronline.com
he display indicates
again.
once,