Table of Contents
Advertisement
ZEPHYR
www.zephyronline.com
"0
iim
t-
0
iim
m
m
C
m
"0
&
0
&
SAVONA
ZSA-M90AS
ZSV-M90AS
ZSA-E30AS
ZSV-E30AS
Voltage
120V
60Hz
Power
consumption
Total:
400W(ZSA)
/ 180W(ZSV)
Lamp:
Max50Wx2
Fan:
300W(ZSA)
/ 80W(ZSV)
Model
number:
Serial
number:
...................................................................................
Dealer
Name:
.................................................................................
Date
of Purchase:
...................................................
AUG06,0301
@ Zephyr
Corporation
Advertisement
Table of Contents
Related Manuals for Zephyr SAVONA ZSA-E30AS
Summary of Contents for Zephyr SAVONA ZSA-E30AS
- Page 1 SAVONA "0 ZSA-M90AS ZSV-M90AS ZSA-E30AS ZSV-E30AS "0 & & Voltage 120V 60Hz Power consumption Total: 400W(ZSA) / 180W(ZSV) Lamp: Max50Wx2 Fan: 300W(ZSA) / 80W(ZSV) Model number: Serial number: ................... Dealer Name: ................. Date of Purchase: ........... AUG06,0301 @ Zephyr Corporation...
- Page 2 c) Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter. READ AND SAVE THESE INSTRUCTIONS d ) Use proper pan size. Always use cookware appropriate for the size of the surface element. WARNING- WARNING- TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,...
- Page 3 INSTALLATIUN MOUNT HEIGHTS & CLEARANCE Minimum mount height between range top to hood bottom should be no less than 28". Maximum mount height should be no higher than 36". It is important to install the hood at the proper mounting height.
- Page 4 INSTALLATION INSTALLATION DUCTING SPECIFICATIONS NEVER exhaust air or terminate duct work into spaces between walls, crawl spaces, ceilings, attics or garages. All exhaust must be ducted to the outside. Use metal ductwork only. Fasten all connections with sheet metal screws and tape all joints with certified silver tape or duct tape.
- Page 5 INSTALLATION INSTALLATION INSTALLATION DUCTLESS CONVERSION Ductless conversion is intended for applications where an exhaust duct work is not possible to be Mounting the Range Hood installed. When converted, the hood functions as a "purifying" hood rather than an exhaust hood. 1.
- Page 6 MAINTENANCE CONTROLS & FEATURES CONTROLS & FEATURES CLEANING Surface Maintenance: Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive Blower On/Off • Lights OVOff detergent (e.c_cornet powder scrub, EZ-Offoven cleaner), or steel wool/scoring pads which will scratch and damage surface.
- Page 7 Damaged because of improper connection with equipment of other manufacturers. Repaired or modified by anyone other than Zephyr's Authorized Agents. What is Not Covered: Consumable parts such as light bulbs, filters, and fuses. Services outside of service area and the labor cost incurred in connection...
- Page 8 SAVONA "0 ZSA-M90AS ZSV-M90AS ZSA-E30AS ZSV-E30AS "0 & & Voltage 120V 60Hz Power consumption Total: 400W(ZSA) / 180W(ZSV) Lamp: Max50Wx2 Fan: 300W(ZSA) / 80W(ZSV) Model number: Serial number: ................... Dealer Name: ................. Date of Purchase: ........... AUG06,0301 @ Zephyr Corporation...
- Page 9 c) Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter. READ AND SAVE THESE INSTRUCTIONS d ) Use proper pan size. Always use cookware appropriate for the size of the surface element. WARNING- WARNING- TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,...
- Page 10 INSTALLATIUN MOUNT HEIGHTS & CLEARANCE Minimum mount height between range top to hood bottom should be no less than 28". Maximum mount height should be no higher than 36". It is important to install the hood at the proper mounting height.
- Page 11 INSTALLATION INSTALLATION DUCTING SPECIFICATIONS NEVER exhaust air or terminate duct work into spaces between walls, crawl spaces, ceilings, attics or garages. All exhaust must be ducted to the outside. Use metal ductwork only. Fasten all connections with sheet metal screws and tape all joints with certified silver tape or duct tape.
- Page 12 INSTALLATION INSTALLATION INSTALLATION DUCTLESS CONVERSION Ductless conversion is intended for applications where an exhaust duct work is not possible to be Mounting the Range Hood installed. When converted, the hood functions as a "purifying" hood rather than an exhaust hood. 1.
- Page 13 MAINTENANCE CONTROLS & FEATURES CONTROLS & FEATURES CLEANING Surface Maintenance: Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive Blower On/Off • Lights OVOff detergent (e.c_cornet powder scrub, EZ-Offoven cleaner), or steel wool/scoring pads which will scratch and damage surface.
- Page 14 Damaged because of improper connection with equipment of other manufacturers. Repaired or modified by anyone other than Zephyr's Authorized Agents. What is Not Covered: Consumable parts such as light bulbs, filters, and fuses. Services outside of service area and the labor cost incurred in connection...
- Page 15 SAVONA "0 ZSA-M90AS ZSV-M90AS ZSA-E30AS ZSV-E30AS "0 & & Voltage 120V 60Hz Power consumption Total: 400W(ZSA) / 180W(ZSV) Lamp: Max50Wx2 Fan: 300W(ZSA) / 80W(ZSV) Model number: Serial number: ................... Dealer Name: ................. Date of Purchase: ........... AUG06,0301 @ Zephyr Corporation...
- Page 16 c) Clean ventilating fans frequently. Grease should not be allowed to accumulate on fan or filter. READ AND SAVE THESE INSTRUCTIONS d ) Use proper pan size. Always use cookware appropriate for the size of the surface element. WARNING- WARNING- TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK,...
- Page 17 INSTALLATIUN MOUNT HEIGHTS & CLEARANCE Minimum mount height between range top to hood bottom should be no less than 28". Maximum mount height should be no higher than 36". It is important to install the hood at the proper mounting height.
- Page 18 INSTALLATION INSTALLATION DUCTING SPECIFICATIONS NEVER exhaust air or terminate duct work into spaces between walls, crawl spaces, ceilings, attics or garages. All exhaust must be ducted to the outside. Use metal ductwork only. Fasten all connections with sheet metal screws and tape all joints with certified silver tape or duct tape.
- Page 19 INSTALLATION INSTALLATION INSTALLATION DUCTLESS CONVERSION Ductless conversion is intended for applications where an exhaust duct work is not possible to be Mounting the Range Hood installed. When converted, the hood functions as a "purifying" hood rather than an exhaust hood. 1.
- Page 20 MAINTENANCE CONTROLS & FEATURES CONTROLS & FEATURES CLEANING Surface Maintenance: Clean periodically with hot soapy water and clean cotton cloth. Do not use corrosive or abrasive Blower On/Off • Lights OVOff detergent (e.c_cornet powder scrub, EZ-Offoven cleaner), or steel wool/scoring pads which will scratch and damage surface.
- Page 21 Damaged because of improper connection with equipment of other manufacturers. Repaired or modified by anyone other than Zephyr's Authorized Agents. What is Not Covered: Consumable parts such as light bulbs, filters, and fuses. Services outside of service area and the labor cost incurred in connection...
Need help?
Do you have a question about the SAVONA ZSA-E30AS and is the answer not in the manual?
Questions and answers