Zephyr Trapeze CTP-E 48SX Use And Installation Manual page 20

R eplacing Light Bulbs:
CAUTION: Light bulbs become extremely hot when turned on. DO NOT touch bulbs until switched o
and cooled. Touching hot bulbs may cause serious burns.
Make sure all power is turned o and bulbs are not hot.
Remove bulb by pressing both ends of the metal retaining clip together, the light socket will now extend from the hood
allowing you to remove the bulb. (Be careful when releasing retaining clip as it is under pressure to hold it in place)
Replacement bulbs are available at most stores which sell light bulbs. Purchase type GU-10, 120V, 50W.
18
Press together
to release clip