Connecting The Power Cable - GeoVision GV-BX110D Quick Start Manual

4.4.2 Connecting the Power Cable

There are two ways to supply power to the Bullet Camera:
•
Use a Power over Ethernet (PoE) adapter to connect the camera to
the network, and the power will be provided at the same time.
•
Use the supplied Terminal Block and power adapter. Follow the steps
below to connect the Terminal Block and power adapter.
1. Insert the black wire of the Bullet Camera to the left pin and the brown
wire to the right pin.
2. Connect the DC 12V Power Adapter to the Terminal Block.
Terminal Block
DC 12V Power Adaptor
4
Bullet Camera
47