Config Menu - Terex DTM 00101 (standard) Operation And Maintenance Manual

4.10-2 Config Menu

Config Menu
Propel Mode
Max Speed
Lift Arm Speed
Auto Idle
High Flow
Display Units
Fan Control
This screen allows you to access editable parameters of the machines control
systems. Use the buttons beneath the up and down arrows to select a sub-menu,
then press the button beneath the check mark to select.
Propel Mode
Propel Mode
ISO Mode
Adjust
This screen allows you to change the propel mode (control configuration) of the
machine.
• ISO mode is the standard mode identified in section 4.2 of this manual.
• H mode are commonly refered to as "Case" type controls.
To switch between the modes, press the button beneath the check mark. Then
use the buttons beneath the arrows to toggle between the options until your
desired mode is displayed, then confirm your selection by pressing the button
beneath the check mark again.
4 MACHINE DESCRIPTION / CONTROLS
51