Table of Contents
Advertisement
BMC Reset
Use jumper JPRST1 to reset the BMC
settings on the motherboard. See the
table on the right for jumper settings.
5-10 Onboard Indicators
GLAN LEDs
There are two LAN ports (LAN1/2) on
the motherboard. Each Ethernet LAN
port has two LEDs. The Yellow LED
on the right indicates connection and
activity. The Link LED on the left side
may be green, amber or off to indicate
the speed of the connection. See the
tables at right for more information.
IPMI Dedicated LAN LEDs
In addition to LAN Ports 1/2, an IPMI
Dedicated LAN is also located on
the I/O Backplane. The amber LED
on the right indicates connection
and activity; while the green LED on
the left indicates the speed of the
connection. See the tables at right for
more information.
Chapter 5: Advanced Serverboard Setup
Jumper Settings
Jumper Setting
Closed
Open
Link Speed
LED
GLAN Activity Indicator
(Right) LED Settings
Color
Off
Yellow
LAN Connection Speed
Indicator (Left) LED Settings
LED Color
Off
Green
Amber
Link LED
Link/Speed LED (Left)
& Activity LED (Right)
Color
Status
Off
Off
Green:
Link/
Solid
Speed
(Left)
Amber
Activity
Blinking
(Right)
5-25
BMC Reset
Defi nition
BMC Reset
Normal (Default)
GLAN LED
Activity
LED
Status
Defi nition
No Connections
Flashing
Active
Defi nition
10 MHz
100 MHz
1 GHz
IPMI LAN
Activity LED
IPMI LAN
Defi nition
No Connection
100 Mb/s
Active
Advertisement
Table of Contents
