Removing The Hard Drive Tray And Installing A Hard Drive - Supero SUPERSERVER8027R-TRF+/7RFT+ User Manual

SUPERSERVER 8027R-TRF+/7RFT+ USER'S MANUAL
6-7 Removing the Hard Drive Tray and Installing a Hard
Drive
To install a hard disk drive into the chassis, it is necessary to remove the HDD
carrier from the chassis.
Removing a Hard Drive Carrier
1. Press the release tab on the front of each hard drive try to unlock the HDD
carrier.
2. Using the handle, pull the HDD carrier out from the chassis as shown.
Figure 6-8: Removing a Hard Drive Carrier
Release Tab
6-8