Table of Contents
Advertisement
About This Manual
This manual is written for professional system integrators and PC technicians.
It provides information for the installation and use of the SuperServer
8027R-TRF+/7RFT+ Installation and maintainance should be performed by
experienced technicians only.
The SuperServer 8027R-TRF+/7RFT+ is a high-end server based on the
SC828TQ-R1K43LPB 2U rackmount chassis and the X9QRi-F+/X9QR7-TF+ quad
processor serverboard. The only difference between the two server models is that
the 8027R-TRF+ server only has SATA connections and the 8027R-7RFT+ server
contains both SATA and SAS connections.
Manual Organization
Chapter 1: Introduction
The fi rst chapter provides a checklist of the main components included with the
server system and describes the main features of the X9QRi-F+/X9QR7-TF+
serverboard and the SC828TQ-R1K43LPB chassis.
Chapter 2: Server Installation
This chapter describes the steps necessary to install the SuperServer
8027R-TRF+/7RFT+ into a rack and check out the server confi guration prior to
powering up the system. If your server was ordered without processor and memory
components, this chapter will refer you to the appropriate sections of the manual
for their installation.
Chapter 3: System Interface
Refer here for details on the system interface, which includes the functions and
information provided by the control panel on the chassis as well as other LEDs
located throughout the system.
Chapter 4: System Safety
You should thoroughly familiarize yourself with this chapter for a general overview
of safety precautions that should be followed when installing and servicing the
SuperServer 8027R-TRF+/7RFT+.
Chapter 5: Advanced Serverboard Setup
Chapter 5 provides detailed information on the X9QRi-F+/X9QR7-TF+ serverboard,
including the locations and functions of connections, headers and jumpers. Refer
to this chapter when adding or removing processors or main memory and when
reconfi guring the serverboard.
Preface
iii
Preface
Advertisement
Table of Contents
