Installing The Outer Rails On The Rack - Supero SUPERSERVER8027R-TRF+/7RFT+ User Manual

SUPERSERVER 8027R-TRF+/7RFT+ USER'S MANUAL

Installing the Outer Rails on the Rack

Installing the Outer Rails (Figure 2-5)
1. Press upward on the locking tab at the rear end of the middle rail.
2. Push the middle rail back into the outer rail.
3. Hang the hooks of the front of the outer rail onto the slots on the front of
the rack. If necessary, use screws to secure the outer rails to the rack, as
illustrated above.
4. Pull out the rear of the outer rail, adjusting the length until it fi ts within the
posts of the rack.
5. Hang the hooks of the rear portion of the outer rail onto the slots on the rear
of the rack. If necessary, use screws to secure the rear of the outer rail to the
rear of the rack.
6. Repeat steps 1-5 for the remaining outer rail.
Figure 2-5: Extending and Releasing the Outer Rails
1
1
1
2
1
3
2-8
1
4