ICON I100 INSTALLATION INSTRUCTIONS
Place the side refractory into the fireplace. Position towards the front of the fireplace and slide it to the rear. See
Figures 19 and 20.
Repeat for other side.
Figure 20 - Side Refractory In
Figure 19 - Installing Side Refractory
(Gas knockout goes to the back.)
Æ
Put the grate retainers in place. Slide into outside edges of the notches in the bottom of the back refractory on
each side. See Figures 21 and 22. Replace the hearth stone. Place the grate into the fireplace and slide the
back legs into the brackets to hold the grate in place.
Replace smoke shield and screen assemblies.
Figure 22 - Grate Retaining Bracket in Place
Figure 21 - Grate Retaining Bracket Sliding into
(left side shown)
Notch in Back Refractory
(left side shown)
12/03
35144 Rev E
16