Table of Contents
Advertisement
ICON I100 INSTALLATION INSTRUCTIONS
Remove the hearth stone by removing the three corrugated shipping spacers (Figure 12). Lift the hearth stone
out of the fireplace. See Figure 13.
Figure 12 - Shipping Spacers
Figure 13 - Lifting Out the Hearth Stone
Remove the fireplace from the pallet. The fireplace is attached to the pallet with two brackets on each side and
rear of the outer shell. See Figure 14. Remove screws from the bracket, pallet and fireplace. Replace the
screws removed from the fireplace. Slide the fireplace into position (the brackets can be used to anchor the
fireplace in position).
Once the fireplace is in position, install the refractory.
Figure 14 - Removing Shipping Brackets
12/03
35144 Rev E
14
Hide quick links:
Advertisement
Table of Contents
