Table of Contents
Advertisement
ICON I100 INSTALLATION INSTRUCTIONS
F. INSTALLATION OF FIREPLACE
1. Position the Fireplace/Refractory Installation
This fireplace may be placed on either a combustible or noncombustible continuous flat surface. Follow the instructions
for framing on pages 9 and 10.
Note:
We recommend two people for the hearth stone and refractory installation.
Remove the back refractory from the outside of the fireplace by bending the tabs up and lifting the refractory out
of the brackets. See Figure 9. Bend tabs back down out of the way. See Figure 10. Do not remove the screws
or brackets from the fireplace. If the brackets are removed, fill the holes in the outer shell with screws.
Repeat this process to remove the side refractories.
Remove the screens by removing the screw from the end of each screen rod. See Figure 11.
Figure 9 - Unpacking Back Refractory
12/03
WARNING!
Figure 10 - Bending Refractory Shipping Tabs Back
Figure 11 - Removing the Screen Rods
35144 Rev E
Down
13
Hide quick links:
Advertisement
Table of Contents
